Komatsu PC1250LC-8

Komatsu PC1250LC-8

Komatsu PC1250LC-8 Excavator for Sale

The PC1250LC-8 is designed to balance the power needed to dig hard dense material like coral while also being able to load out mass quantities of material like topsoil. Power, economy, heavy lift and swing priority work modes allow the operator to operate his machine in the most efficient manner for his current work. Two boom mode settings and shockless boom control make operation smoother and more productive.

 

FEATURES

  • HIGH-PRESSURE IN-LINE FILTRATION: The PC1250LC-8 has the most extensive filtration system available, providing in-line filters as standard equipment. An in-line high pressure filter in the outlet port of each main hydraulic pump reduces failures caused by contamination.
  • LOW VIBRATION WITH CAB DAMPER MOUNTING: The PC1250LC-8 uses a new, improved cab damper mount system that incorporates longer stroke and the addition of a spring. The new cab damper mounting, combined with a strengthened left and right side deck, aids vibration reduction at the operator’s seat.
  • Vibration at the floor is reduced from 120 dB (VL) to 115 dB (VL).
  • WIDE CATWALK LARGE STEPS AND HANDRAILS: Easier, safer operator cab access and maintenance checks.
  • HIGH-QUALITY EMMS SELF-DIAGNOSTIC SYSTEM:
    • Abnormality Checking Function: If an abnormality should occur, the monitoring system checks whether hydraulic pressures, solenoid ON/OFF status, engine speed, electrical connections, etc. are within normal operating range.
    • Maintenance History Memory Function: Maintenance records such as replacement of engine oil, hydraulic oil, filters, can be stored. Operator is warned when service is due.
    • Trouble Data Memory Function: Trouble data is stored to serve as reference for future troubleshooting. Error codes are displayed to aid in service diagnosis.
Body
Frame Center: H-leg; X-Frame on MH
Track: Box-section
Steering Two-lever with pedals
Dimensions
Length 52’-52’8”
Width 17’3”
Height 19 ft. 10 in. - 22 ft. 11 in. (6,044 - 6,986 mm) overall
Weight 250,154 - 254,000 lbs. (113,480 - 115,200 kg) operating
244,418-279,157 lbs. (material handler)
Fuel Tank Capacity 359.3 gal. (1,360 l)
Engine
Engine Make Komatsu
Engine Model SAA6D170E-5
Engine Type Water-cooled, 4-cycle, direct injection
Cylinders 6
Horsepower 688 hp (514 kW) @ 1,800 rpm
Net Horsepower 672 hp (502 kW) @ 1,800 rpm
Cooling Water-cooled
Bore x Stroke 6.69 x 6.69 in. (170 x 170 mm)
Displacement 1,413 cu. in. (23.15 l)
Rated Speed - High 2.0 mph (3.2 km/h)
Rated Speed - Low 1.3 mph (2.1 km/h)
Fuel Type Diesel
Governor All-speed control, electronic
Rated RPM 1800 rpm
Aspiration Turbocharged, aftercooled, cooled EGR
Piston Displacement 1,413 in³
Drivetrain
Number of Speeds 2
Brakes Service: Hydraulic lock
Gradeability 70%
Drawbar Pull 154,320 lbf
Track Type Sealed
Track Rollers Standard, SP, Shovel: 8 (each side)
Long undercarriage: 10 (each side)
Ground Pressure 10.7-12.5 psi
Carrier Rollers 3 (each side)
Track Adjuster Hydraulic
Hydraulic
Pump Variable capacity piston pumps
5 Pumps: Boom, arm, bucket, swing, travel circuits
Std Pump Flow (2) 130.5 gpm (494 lpm) implement and travel
158.5 gpm (600 lpm) swing
Control Valve Gear type
Hydraulic Tank Capacity 177 gal. (670 l)
Hydraulic Cylinders Number of cylinders-bore x stroke
Backhoe Boom: 2-8.9" x 94.1"
Backhoe Arm: 1-9.8" x 95.9"
Number of Buckets: bore x stroke
Bucket Standard: 2-6.3" x 71.8"
Bucket SP: 2-6.3" x 76.8"
Relief Valve Setting Implement circuits: 4,550 psi
Travel circuit: 4,980 psi
Swing circuit: 3,910 psi
Pilot circuit: 430 psi
Hydraulic Working Modes 2
Travel Motor Axial piston motor, in-shoe design
Hydraulic Motors Travel: 2 x axial piston motors with parking brake
Swing: 2 x axial piston motors with swing holding brake
Operational
Bucket Width 59 - 87.4 in. (1,499 - 2,220 mm)
Dig Depth 30 ft. 8 in. - 38 ft. (9,348 - 11,580 mm)
Dig Height 44 ft. - 45 ft. 8 in. (13,410 - 13,920 mm)
Arm Length 11'10"
Bucket Reach 50 ft. 4 in. - 57 ft. 3 in. (15,350 - 17,450 mm) digging
Bucket Digging Force 77,160 - 94,800 lbs. (35,000 - 43,000 kg) SAE
87,520 - 107,590 lbs. (39,700 - 48,796 kg) ISO
Dump Height 28’6”-31’
Bucket Capacity 4.4 cu. yd. (3.4 - 5.2 m³)
4-7 yd³ (Material Handler)
Travel Speed - Forward High: 2.0 mph
Low: 1.3 mph
Boom Length 29 ft. 10 in. (9,092 mm)
Boom Swing Radius 26 ft. 2 in. - 26 ft. 9 in. (7,977 - 8,153 mm)
Swing Speed 5.5 rpm
Shoes Standard, SP, Shovel: 48 (each side)
Long undercarriage: 55 (each side)
Swing Reduction Planetary gear
Swing Circle Lubrication Grease-bathed
Swing Lock Oil disc brake
Drive Method Fully hydrostatic
Swing System: 2 x hydraulic motors
Hydraulic Type Open-center load sensing system
Digging Reach 50’4”-57’3”
49’3”-56’2” (at ground level)

ENGINE AND RELATED ITEMS:

  • Air cleaner, double element, dry type
  • Auto decelerator
  • Electric fuel priming pump
  • Engine, Komatsu SAA6D170E-5
  • Fuel pre-filters (10 micron) with water separator
  • Fuel primary filter (2 micron)
  • Variable speed cooling fan, hydraulic drive, reversible

ELECTRICAL SYSTEM:

  • Alternator, 90 amp, 24 V
  • Batteries, 220 Ah, 2 x 12 V
  • Interconnected horn and flashing light
  • Power supply, 12V
  • Starting motors, 11kW x 2
  • Step light with timer
  • Working lights-2 boom, 2 cab top front, 1 cab bottom

UNDERCARRIAGE:

  • 700 mm 28'' double grouser (PC1250-8)
  • 1000 mm 39.4'' double grouser (PC1250LC-8)
  • 8 track/3 carrier rollers (each side)(PC1250-8)
  • 10 track/3 carrier rollers (each side)(PC1250LC-8)
  • Hydraulic track adjusters (each side)
  • Track guiding guard (each side)

GUARDS AND COVERS:

  • Engine thermal guards and fan guard
  • Dust-proof net for radiator and oil cooler
  • Pump/engine room partition wall
  • Travel motor guards
  • Revolving frame under cover (Heavy-duty)
  • Track frame undercover (center)

OPERATOR ENVIRONMENT:

  • Damper mount, all-weather, pressurized, sound- suppressed cab with tinted safety glass windows, lockable door, intermittent window wiper and washer, floormat, cigarette lighter and ashtray
  • Instrument panel with electronic display/monitor system, electronically-controlled throttle dial, electric service meter, gauges (coolant temperature, hydraulic temperature and fuel level), caution lights (electric charge, engine oil pressure, and air cleaner clogging), indicator lights (engine preheating and swing lock light) level check lights (coolant, engine oil, and hydraulic oil level), self-diagnostic system with trouble data memory
  • Automatic air conditioner/heater/defroster system
  • FOPS
  • Pull-up type front window, lockable
  • Radio, AM-FM
  • Rearview mirrors, left and right
  • Seat, fully adjustable with suspension
  • Seat belt 78 mm 3" non-cinching

HYDRAULIC CONTROLS:

  • Fully hydraulic, with Electronic Open-Center Load- Sensing (EOLSS) and engine speed sensing (pump and engine mutual control system)
  • One gear pump for control circuit
  • Two axial piston motors for swing with single-stage relief valve
  • One axial piston motor per track for travel with counter balance valve
  • Three variable capacity piston pumps (2 Main, 1 Swing)
  • Three control valves, 5+4+4 spools (boom, arm, bucket, swing, and travel)
  • Control levers, wrist control levers for arm, boom, bucket, and swing with PPc system
  • Control levers and pedals for steering and travel with PPC system
  • Oil cooler, hydraulic
  • In-line high pressure hydraulic filters
  • Shockless boom control
  • Swing priority mode
  • Two-mode setting for boom
  • Working modes: Power, Economy (four level), Heavy Lift

DRIVE AND BRAKE SYSTEM:

  • Brakes, hydraulic lock travel brakes, oil disc parking
  • Hydrostatic two travel speed system with planetary double reduction final drive

OTHER STANDARD EQUIPMENT:

  • Automatic swing holding brake
  • Corrosion resister
  • Counterweight, 18000 kg 39,680 lb
  • Grease gun, air pump type
  • Horn, air
  • Large handrails and steps
  • Lift capacity chart
  • Marks and plates, English
  • One-touch engine oil drainage
  • Paint, Komatsu standard
  • PM tune-up service connector
  • Slip resistant plates
  • Travel alarm
  • Vehicle Health Monitoring System (VHMS) with ORBCOMM
  • Wide catwalk

Arms (Backhoe):

  • 3400 mm / 11'2'' arm assembly
  • 3400 mm / 11'2'' SP arm assembly (PC1250-8)
  • 4500 mm / 14'9'' arm assembly
  • 5700 mm / 18'8'' arm assembly

Booms (Backhoe):

  • 7800 mm / 25'7'' SP boom assembly (PC1250-8)
  • 9100 mm / 29'10'' boom assembly

Shoes:

  • 1000 mm / 39.4'' double grouser (PC1250-8)
  • 1200 mm / 47.25'' double grouser (PC1250LC-8)

Other:

  • Cab full front guard (PC1250-8)
  • Track roller guard (full length) (PC1250-8)

*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.

*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.

New Equipment Sales only available in assigned territories where Kirby-Smith Machinery, Inc. is a licensed distributor. Not all manufacturer's brands available at each location. Please contact your local Kirby-Smith branch if you have questions regarding availability.

Komatsu’s Comparison Tools

View Brochure

Main Technical Specifications
MAKE Komatsu
MODEL PC1250LC-8

Want to rent it?

Do you want to know if renting makes more economical sense?
Call us and find out today.

Komatsu PC1250LC-8

print
6715 W. Reno
Oklahoma City, OK 73127 Phone: 888.861.0219
www.kirby-smith.com
CUSTOMER
DATE
PRICE
SALESPERSON

Komatsu PC1250LC-8 Excavator for Sale

The PC1250LC-8 is designed to balance the power needed to dig hard dense material like coral while also being able to load out mass quantities of material like topsoil. Power, economy, heavy lift and swing priority work modes allow the operator to operate his machine in the most efficient manner for his current work. Two boom mode settings and shockless boom control make operation smoother and more productive.

 

FEATURES

  • HIGH-PRESSURE IN-LINE FILTRATION: The PC1250LC-8 has the most extensive filtration system available, providing in-line filters as standard equipment. An in-line high pressure filter in the outlet port of each main hydraulic pump reduces failures caused by contamination.
  • LOW VIBRATION WITH CAB DAMPER MOUNTING: The PC1250LC-8 uses a new, improved cab damper mount system that incorporates longer stroke and the addition of a spring. The new cab damper mounting, combined with a strengthened left and right side deck, aids vibration reduction at the operator’s seat.
  • Vibration at the floor is reduced from 120 dB (VL) to 115 dB (VL).
  • WIDE CATWALK LARGE STEPS AND HANDRAILS: Easier, safer operator cab access and maintenance checks.
  • HIGH-QUALITY EMMS SELF-DIAGNOSTIC SYSTEM:
    • Abnormality Checking Function: If an abnormality should occur, the monitoring system checks whether hydraulic pressures, solenoid ON/OFF status, engine speed, electrical connections, etc. are within normal operating range.
    • Maintenance History Memory Function: Maintenance records such as replacement of engine oil, hydraulic oil, filters, can be stored. Operator is warned when service is due.
    • Trouble Data Memory Function: Trouble data is stored to serve as reference for future troubleshooting. Error codes are displayed to aid in service diagnosis.
GENERAL INFORMATION
Manufacturer
Komatsu
Model Year
Model
PC1250LC-8
Condition
NEW
Body
Frame
Center: H-leg; X-Frame on MH Track: Box-section
Steering
Two-lever with pedals
Dimensions
Length
52’-52’8”
Width
17’3”
Height
19 ft. 10 in. - 22 ft. 11 in. (6,044 - 6,986 mm) overall
Weight
250,154 - 254,000 lbs. (113,480 - 115,200 kg) operating 244,418-279,157 lbs. (material handler)
Fuel Tank Capacity
359.3 gal. (1,360 l)
Engine
Engine Make
Komatsu
Engine Model
SAA6D170E-5
Engine Type
Water-cooled, 4-cycle, direct injection
Cylinders
6
Horsepower
688 hp (514 kW) @ 1,800 rpm
Net Horsepower
672 hp (502 kW) @ 1,800 rpm
Cooling
Water-cooled
Bore x Stroke
6.69 x 6.69 in. (170 x 170 mm)
Displacement
1,413 cu. in. (23.15 l)
Rated Speed - High
2.0 mph (3.2 km/h)
Rated Speed - Low
1.3 mph (2.1 km/h)
Fuel Type
Diesel
Governor
All-speed control, electronic
Rated RPM
1800 rpm
Aspiration
Turbocharged, aftercooled, cooled EGR
Piston Displacement
1,413 in³
Drivetrain
Number of Speeds
2
Brakes
Service: Hydraulic lock
Gradeability
70%
Drawbar Pull
154,320 lbf
Track Type
Sealed
Track Rollers
Standard, SP, Shovel: 8 (each side) Long undercarriage: 10 (each side)
Ground Pressure
10.7-12.5 psi
Carrier Rollers
3 (each side)
Track Adjuster
Hydraulic
Hydraulic
Pump
Variable capacity piston pumps 5 Pumps: Boom, arm, bucket, swing, travel circuits
Std Pump Flow
(2) 130.5 gpm (494 lpm) implement and travel 158.5 gpm (600 lpm) swing
Control Valve
Gear type
Hydraulic Tank Capacity
177 gal. (670 l)
Hydraulic Cylinders
Number of cylinders-bore x stroke Backhoe Boom: 2-8.9" x 94.1" Backhoe Arm: 1-9.8" x 95.9" Number of Buckets: bore x stroke Bucket Standard: 2-6.3" x 71.8" Bucket SP: 2-6.3" x 76.8"
Relief Valve Setting
Implement circuits: 4,550 psi Travel circuit: 4,980 psi Swing circuit: 3,910 psi Pilot circuit: 430 psi
Hydraulic Working Modes
2
Travel Motor
Axial piston motor, in-shoe design
Hydraulic Motors
Travel: 2 x axial piston motors with parking brake Swing: 2 x axial piston motors with swing holding brake
Operational
Bucket Width
59 - 87.4 in. (1,499 - 2,220 mm)
Dig Depth
30 ft. 8 in. - 38 ft. (9,348 - 11,580 mm)
Dig Height
44 ft. - 45 ft. 8 in. (13,410 - 13,920 mm)
Arm Length
11'10"
Bucket Reach
50 ft. 4 in. - 57 ft. 3 in. (15,350 - 17,450 mm) digging
Bucket Digging Force
77,160 - 94,800 lbs. (35,000 - 43,000 kg) SAE 87,520 - 107,590 lbs. (39,700 - 48,796 kg) ISO
Dump Height
28’6”-31’
Bucket Capacity
4.4 cu. yd. (3.4 - 5.2 m³) 4-7 yd³ (Material Handler)
Travel Speed - Forward
High: 2.0 mph Low: 1.3 mph
Boom Length
29 ft. 10 in. (9,092 mm)
Boom Swing Radius
26 ft. 2 in. - 26 ft. 9 in. (7,977 - 8,153 mm)
Swing Speed
5.5 rpm
Shoes
Standard, SP, Shovel: 48 (each side) Long undercarriage: 55 (each side)
Swing Reduction
Planetary gear
Swing Circle Lubrication
Grease-bathed
Swing Lock
Oil disc brake
Drive Method
Fully hydrostatic Swing System: 2 x hydraulic motors
Hydraulic Type
Open-center load sensing system
Digging Reach
50’4”-57’3” 49’3”-56’2” (at ground level)

Legal Notice: Manufacturer Name, Logo and Model Information are Registered Trademarks of the Manufacturer.
Specifications and other information are subject to change without notice. No representation of accuracy is made.
Image is believed to be in the public domain or used with permission.
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.

New Equipment Sales only available in assigned territories where Kirby-Smith Machinery, Inc. is a licensed distributor. Not all manufacturer's brands available at each location. Please contact your local Kirby-Smith branch if you have questions regarding availability.
LOCATIONS
CAREERS
CONTACT