WIRTGEN WR 240 X

New WIRTGEN Stabilizer/Cold Recycler

New WIRTGEN WR 240 X Stabilizer/Cold Recycler for Sale

The WR series cold recyclers and stabilizers have a variable mixing chamber and microprocessor-controlled injection systems for the addition of bitumen emulsion, water, or foamed bitumen. Thanks to an efficient hydraulic flow divider, the all-wheel drive provides maximum traction, while the four-fold full-floating axles ensures best possible ground clearance in challenging terrain. The WR series machines are therefore ideal for a variety of application scenarios ranging from cold recycling - structural road rehabilitation - to the stabilization of various construction materials such as, for example, in soil stabilization or consolidation in the construction of traffic infrastructure.

Cold Recyclers and Stabilizers for Maximum Mixing Performance and Quality

  • The WR series machines are ideal for a variety of application scenarios from cold recycling and structural road rehabilitation to the stabilization of a wide range of construction materials in processes such as soil stabilization or consolidation in road construction.
  • The WR 240 X strikes a perfect balance between machine performance and weight that assures high daily productivity.
  • The intuitive man-machine interface (MMI) of the X-Tier models provides comprehensive assistance for proper operation to increase the in-situ mixing quality of the construction material being produced and to boost machine productivity.
  • The MIX ASSIST digital components and the WIRTGEN GROUP COPILOT enable significantly greater efficiency, which in turn leads to considerably lower operating costs per square meter.
Body
Tires 28L-26
Dimensions
Length 30’5”
Width 9’10”
Height 9’10”
Weight 67,462 lbs.
Ground Clearance 1’3”
Transport Length 30’5”
Transport Height 9’10”
Transport Width 9’10”
Lateral Inclination 8°
Engine
Engine Make Cummins
Engine Model X-15
Engine Type EU Stage 5/US EPA Tier 4f
Horsepower 610 HP
Displacement 909.3 in³
Fuel Consumption 30.4 GPH (full load)
14.5 GPH (jobsite mix)
Fuel Tank Capacity 65 Gallons
Water Tank Capacity 132 Gallons
Number of Cylinders 6
Drivetrain
Working Speed 7.8 MPH
Hydraulic
Hydraulic Oil Capacity 85 Gallons
Operational
Cutting Diameter 4’10”
Working Width 7’10”
Working Depth 20”
Travel Speed-High 7.85 MPH
AdBlue Tank Capacity 26 Gallons
Electrical
Power Supply 24 V
Sound Power ≤109 dB(A) (EN 500-3: engine)
≤73 dB(A) (operator’s platform)
  • Exhaust emissions category: EU Stage 5/US EPA Tier 4f
  • Operating and travel speed: 7.8 MPH
  • Working width max: 7’10”
  • Working Speed: 7.8 MPH
  • Working depth: 20”
  • Operating weight: 67,462 lbs.
  • Lateral Inclination: 8°
  • Maximum power: 610 HP

 

Standard Equipment

  • Machine Control and Leveling System
    • Automatic function for positioning and end of cut process
    • Self-explanatory diagnostic technology with continuous function monitoring
    • Separate CAN bus systems for increased machine reliability
  • Operator’s Platform
    • Roll-over protection system (ROPS and FOPS) integrated in the cab frame
    • Safety seat belt as support system for the operator
    • Comfortable, high-quality operator’s cabin with flexible mountings, roof hatch and vent window on the right for ventilation
    • Recirculating and fresh air filters can be changed without tools
    • Ergonomic, air-cushioned operator’s seat
    • User-friendly working environment with intuitively laid out controls on the respective arm consoles
    • Automatic air conditioner, heater and radio
    • LED working lights integrated in the operator’s cabin roof
    • Steering operation either by steering wheel or equivalent finger-tip steering in the left arm console
    • Large windows with an excellent view of the respective work area and built-in windshield wipers
    • Mirrors on right and left in the front area of the machine
    • In order to prove an ideal view over the zero edge, the operator’s cabin can be shifted over the right-hand side of the machine
    • Reverse assist with graphic auxiliary lines in the camera image
    • 90° revolving operator’s seat
    • Folding ladder to access the operator’s platform
    • Various shelves and storage compartments as well as 12 V and USB type A/C sockets
  • Track Unit and Height Adjustment
    • Four different steering modes for easy maneuvering with a minimum turning radius
    • Powerful all-wheel drive for maximum traction
    • 4-way oscillation with lifting column concept for optimum cross-country mobility and ground clearance
  • Miscellaneous
    • European type certification, EuroTest mark and CE conformity
    • Comprehensive LED lighting for the working area and the surroundings
    • Extensive safety package with 3 EMERGENCY STOP switches
    • “Welcome-and-Go-Home-Light” with LED lighting in the ladder area
    • Comprehensive tool kit in lockable storage compartment

Standard Equipment, can be replaced with optional equipment if desired

  • Machine Control and Leveling System
    • Transverse tilt display
  • Operator’s Platform
    • Rear view camera with graphic reverse assistant
  • Miscellaneous
    • Standard painting in RAL 9001 (cream)
    • John Deere Operations Center: Digital solutions for optimizing processes, machines, and services
    • Storage compartment at the rear of the machine for tool
  • Milling and Mixing Rotor
    • DURAFORCE milling and mixing rotor FB2400 HT22 PLUS LA20 with 139 WCC tools and 24 round-shank picks D22
  • Injection System/Addition of Binders
    • Single spraying system with VARIO spraying bars for water or bitumen emulsion (211 gal/min (800 l/min))
    • Single spraying system for water (476 gal/in (1,800 l/min))
    • Dual spraying system with VARIO spraying bars for water (800 l/min) and bitumen  emulsion (800 l/min)
    • Dual spraying system with VARIO spraying bars for water and bitumen emulsion (211 gal/min (800 l/min)) or foamed bitumen (1,102 lbs/min (500 kg/min))
    • A filter unit for VARIO spraying system for water or bitumen emulsion (211 gal/min (800 l/min))
    • Two filter units for dual VARIO spraying system for water and bitumen emulsion (211 gal/min (800 l/min))
    • One Filter unit for spaying unit for water (476 gal/min (1,800 l/min))
    • Hose connection for spraying systems, optional for tanker or Camlock
  • Machine Control and Leveling System
    • Cross-slope sensor
  • Operator’s Platform
    • Rear view camera with graphic reverse assist, four additional cameras, and an extra 12-inch HD touch color display
  • Miscellaneous
    • Painting in one special color (RAL)
    • Painting in two special colors (RAL)
    • Version without JDLINK
    • Pre-fitting for WPT Stabilizing and AutoTrac
    • Large storage compartment at the rear of the machine for tool and up to 20 toolboxes
    • USB interface for retrieving the job data
    • WPT (WIRTGEN GROUP Performance Tracker) Stabilizing
    • WPT (WIRTGEN GROUP Performance Tracker) Stabilizing and AutoTrac (satellite-enabled steering system)
    • AutoTrac satellite-based steering system
    • High-pressure water cleaner at 2,176 psi (150 bar) and 4 gal/min (15 l/min)
    • Additional water tank with a capacity of 950 liters
    • Battery-operated hydraulic unit
    • Milling drum rotation device
    • Pneumatic hammer with pick ejector and driver mount
    • Hydraulic round-shank pick ejector
    • Additional side storage compartment for 8 toolboxes
    • “Go to tool change” control unit for rotor tool exchange
    • Diesel tank filling pump with 24 ft 6 in (7.50 m) suction hose
    • Wiggins fast fill system for diesel refuelling
    • Suction hose for hot bitumen 3”, 4000 LG – connections optionally in tank truck or Camlock type
    • Suction hose for water or emulsion 3”, 5000 LG – connections optionally in tank truck or Camlock type
    • Push bar (additional)
    • Connection pipe of the intake manifolds for dual spraying system – connections optionally in tank truck or Camlock type
    • Support arm for holding the push bar and feed lines whilst changing tankers
    • Storage compartment for push bar
    • Additional bitumen filter with cleaning housing
    • Suction hose for water 3”, 20000 LG – connections optionally in tank truck or Camlock type
    • Central lubrication system

All machines are not available at all locations.

View Brochure

Main Technical Specifications
MAKE WIRTGEN
MODEL WR 240 X

Why rent when you can own?

Call us to see if ownership makes economical sense for you and your organization.

WIRTGEN WR 240 X

print
6715 W. Reno
Oklahoma City, OK 73127 Phone: 888.861.0219
www.kirby-smith.com
CUSTOMER
DATE
PRICE
SALESPERSON

New WIRTGEN WR 240 X Stabilizer/Cold Recycler for Sale

The WR series cold recyclers and stabilizers have a variable mixing chamber and microprocessor-controlled injection systems for the addition of bitumen emulsion, water, or foamed bitumen. Thanks to an efficient hydraulic flow divider, the all-wheel drive provides maximum traction, while the four-fold full-floating axles ensures best possible ground clearance in challenging terrain. The WR series machines are therefore ideal for a variety of application scenarios ranging from cold recycling - structural road rehabilitation - to the stabilization of various construction materials such as, for example, in soil stabilization or consolidation in the construction of traffic infrastructure.

Cold Recyclers and Stabilizers for Maximum Mixing Performance and Quality

  • The WR series machines are ideal for a variety of application scenarios from cold recycling and structural road rehabilitation to the stabilization of a wide range of construction materials in processes such as soil stabilization or consolidation in road construction.
  • The WR 240 X strikes a perfect balance between machine performance and weight that assures high daily productivity.
  • The intuitive man-machine interface (MMI) of the X-Tier models provides comprehensive assistance for proper operation to increase the in-situ mixing quality of the construction material being produced and to boost machine productivity.
  • The MIX ASSIST digital components and the WIRTGEN GROUP COPILOT enable significantly greater efficiency, which in turn leads to considerably lower operating costs per square meter.
GENERAL INFORMATION
Manufacturer
WIRTGEN
Model Year
Model
WR 240 X
Condition
NEW
Body
Tires
28L-26
Dimensions
Length
30’5”
Width
9’10”
Height
9’10”
Weight
67,462 lbs.
Ground Clearance
1’3”
Transport Length
30’5”
Transport Height
9’10”
Transport Width
9’10”
Lateral Inclination
8°
Engine
Engine Make
Cummins
Engine Model
X-15
Engine Type
EU Stage 5/US EPA Tier 4f
Horsepower
610 HP
Displacement
909.3 in³
Fuel Consumption
30.4 GPH (full load) 14.5 GPH (jobsite mix)
Fuel Tank Capacity
65 Gallons
Water Tank Capacity
132 Gallons
Number of Cylinders
6
Drivetrain
Working Speed
7.8 MPH
Hydraulic
Hydraulic Oil Capacity
85 Gallons
Operational
Cutting Diameter
4’10”
Working Width
7’10”
Working Depth
20”
Travel Speed-High
7.85 MPH
AdBlue Tank Capacity
26 Gallons
Electrical
Power Supply
24 V
Sound Power
≤109 dB(A) (EN 500-3: engine) ≤73 dB(A) (operator’s platform)

Legal Notice: Manufacturer Name, Logo and Model Information are Registered Trademarks of the Manufacturer.
Specifications and other information are subject to change without notice. No representation of accuracy is made.
Image is believed to be in the public domain or used with permission.
All machines are not available at all locations.
LOCATIONS
CAREERS
CONTACT