Wirtgen WPS 62i

New Wirtgen WPS 62i Placer/Spreader

If reinforcement needs to be laid in advance during the construction of concrete roadways, the concrete can be fed in laterally using a placer/spreader. The placer/spreader travels in front of the slipform paver over the pre-placed reinforcement, while a truck mixer feeds the belt conveyor with concrete from the side. The concrete is poured evenly over the pre-placed reinforcement, in front of the slipform paver, and distributed across the entire working width. Once the truck mixer is empty, the belt conveyor can be folded away in a very short time to clear the path for the next mixer.

The cost-effective two-track placer / spreader is designed for high-performance concrete feeding at widths of 12 ft to 24 ft and thicknesses of 19.7 in (500 mm).

The machine concept with a hydraulically telescoping machine frame and concrete strikeoff unit makes the machine highly adaptable to any job site situation.

The powerful, fast folding feeder conveyor features an intelligent control concept and guarantees maximum concrete availability for the slipform paver following behind it.

The fully modular machine design comes standard-equipped with hydraulic quick-change couplings for easy conversion, rapid transport, and maximum machine availability.

The machine can be precisely controlled via stringline scanning, via 3D applications without a stringline, or via WIRTGEN Autopilot 2.0.
Specs
Strike Off Wall: Modularly extendable up to 24'
Dimensions
Length 23’3”
Width 9’1”
Height 13’5”
Weight 74,957-88,185 lbs.
Height Adjustment 3’7”
Crawler Track 2
Engine
Engine Type US EPA Tier 4f
Fuel Tank Capacity 106 Gallons
Engine/Drivetrain
Engine Make Deutz
Engine Model TCD 6.1 L6
Cylinders 6
Horsepower 241 HP
Cooling Water
Displacement 370 in³
Fuel Consumption 12 gph (full load)
5 gph (2/3 load)
Emission Standards Tier 4f
Hydraulic
Hydraulic Capacity 53.8 Gallons
Operational
Paving Speed 0 - 33 ft/min
Travel Speed - Forward 0 to 33 ft/min
Belt Conveyor Width 5'3"
Belt Conveyor Speed 0 to 9.8 ft/s
Position Units B1: 11'1" x 12" x 2'2"
Belt Conveyor Folding Process 6 sec.
Electrical
Power Supply 24 V DC
Paving
Tracked or Wheeled 2 Crawler Tracks
Paving Width 12’-24’
Paving Depth 0-20”
Spreader/Auger Two-piece, modularly extendable up to 24 ft
Slab Paving Application Paving width: 12’-24’
Paving height: up to 20”
Hopper
Conveyor Belt conveyor drive power: 94 kW
  • Exhaust emissions category:  EU Stage 5/US EPA Tier 4f
  • Rated power: 180  kW / 241 hp
  • Belt conveyor drive power: 94 kW
  • Number of crawler tracks: 2
  • Paving width: 12’-24’
  • Paving height: 0-20”
  • Operating weight, CE (at paving width of 12’): 74,957-88,185 lbs
  • Paving speed: 0-33 ft/min (0-10 m/h)
  • Travel speed: 0-59 ft/min (0-18 m/min)
  • Displacement: 369.6 in³

 

Standard Equipment

  • Basic Machine
    • Basic machine consisting of engine station and machine frame telescoping mechanically to the left and right for accommodating concrete placing units between the track units, including pre-fitting for two track units
    • Fuel tank 106 gal (400 l)
    • Electrical system (24 V)
    • Cooling system with temperature-controlled fan speed
    • Hydraulic system including an adequately sized hydraulic oil tank and a pump transfer gearbox with 2 output shafts and the pumps required for the machine’s basic equipment package
  • Main Frame and Height Adjustment
    • Heavy-duty steel frame which can be telescoped to either side by 2 ft 8 in (813 mm), enabling a total telescoping range of 5 ft 4 in (1.63 m).  Optional expansion using fixed extension pieces
    • The machine frame is pre-fitted with multiple mounting points for the modular addition for a variety of equipment features
    • A concrete equipment of 12 ft can be connected to the frame, optionally extendable to working width up to 24 ft
  • Crawler Units and Chassis Linkage
    • Paving speed of B1 track unit: 0 to 33 ft/min (0 to 10/min)
    • Transport speed of B1 track unit: 0 to 59 ft/min (0 to 18/min)
  • Machine Control, Leveling and Steering
    • WI-CONTROL – high-quality control system ensuring perfect interaction between all machine features
    • Error messages are displayed on the machine’s control screen
    • The existing CAN-bus system can be expanded to customer specifications
    • ECO mode: performance-optimized engine management system for reduced diesel consumption and low noise emissions
    • Proportional electrohydraulic leveling and steering by means of a PLC system including four leveling sensors and two steering sensors
    • Sensor mounting brackets, adjustable in height and range
    • An electronic slope sensor enables paving with a working with of 13 ft (3.96 m) with a stringline on only one side
    • Four leveling hydraulic cylinders with 3 ft 6 in (1.10 m)
  • Operator’s Platform
    • Ergonomically designed operator’s platform providing a perfect view of the paving process
    • Three control panels with clear, language-independent labelling for ergonomic operation
    • Control panel 1 for machine setup according to site requirements
    • Control panel 2 with multifunctional control screen providing the operator with all relevant machine parameters and allowing settings to be made via a menu; the control panel can be adjusted to all directions of travel and paving configurations
    • Control panel 3 for controlling concrete feeding and spreading
    • Two control panels can be stored in the engine compartment; the third control panel can be protected against vandalism and weather by means of a lockable cover
    • Automatic recognition of each machine configuration provides easy orientation for the machine operator
  • Miscellaneous
    • Comprehensive toolkit in lockable toolbox
    • Comprehensive safety package with EMERGENCY STOP switches
    • Pre-fitting for installing the WITOS FleetView control unit
    • Filling of the machine’s hydraulic system with mineral hydraulic oil

 

Standard Equipment, can be replaced with optional equipment if desired

  • Main Frame and Height Adjustment
    • Frame elements for mechanical telescoping in increments to working widths of up to 14 ft 9 in (4.50 m)
  • Concrete Spreading Equipment for Slab Paving
    • Concrete placing unit, consisting of an auger and a height-adjustable strike-off unit, basic width 12 ft
    • Powerful conveyor belt used to feed concrete from the side
  • Crawler Units and Chassis Linkage
    • Model with two B1 track units (10 rollers), fitted with triple-grouser steel track pads
  • Miscellaneous
    • Standard painting in RAL 9001 (cream)
    • WITOS FleetView – professional telematics solution for machine operation and service optimization
    • Lighting system including 4 halogen working lights, 24 V
  • Main Frame and Height Adjustment
    • Chassis components for continuous hydraulic telescoping for working widths up to 20 ft 6 in (6.25 m)
    • Frame elements for continuous hydraulic telescoping to working widths of up to 24 ft, including extension elements
  • Concrete Spreading Equipment for Slab Paving
    • Extension for concrete placing unit 1 ft on the left – spreading auger and strike-off wall
    • Extension for concrete placing unit 1.5 ft on the left – spreading auger and strike-off wall
    • Extension for concrete placing unit 2 ft on the left – spreading auger and strike-off wall
    • Extension for concrete placing unit 4 ft on the left – spreading auger and strike-off wall
    • Extension for concrete placing unit 1 ft on the right – spreading auger and strike-off wall
    • Extension for concrete placing unit 1.5 ft on the right – spreading auger and strike-off wall
    • Extension for concrete placing unit 2 ft on the right – spreading auger and strike-off wall
    • Extension for concrete placing unit 4 ft on the right – spreading auger and strike-off wall
  • Crawler Units and Chassis Linkage
    • Model with two B1 track units (10 rollers), fitted with polyurethane track pads
  • Machine Control, Leveling and Steering
    • Cross-slope sensor
    • Two slab tracers
    • Four slab tracers
    • Control console for manual track unit steering
    • Pre-fitting for 3D leveling
    • Additional slope sensors for 3D leveling
    • AutoPilot 2.0 (902-928 MHz) with Field Rover
    • Laser transmitter for AutoPilot 2.0 including stand
    • Laser receiver for AutoPilot 2.0
    • Ultrasonic sensor for AutoPilot 2.0
    • Total station Leica iCON robot 50 for AutoPilot 2.0
    • Additional tablet computer with case for AutoPilot 2.0
  • Operator’s Platform
    • Weather canopy for operator’s platform with manual fold-down feature
    • Extension of walkway allowing the operator to pass from one side of the machine to the other for working widths of up to 19 ft 8 in (6.0 m)
    • Extension of walkway allowing the operator to pass from one side of the machine to the other for working widths of up to 24 ft
  • Miscellaneous
    • Painting in one special color (RAL)
    • Painting in two special colors (RAL)
    • Painting in maximum two special colors with the lower part of the machine painted in special color (RAL)
    • Model without WITOS FleetView
    • High-performance lighting system including 8 LED working lights, 24 V
    • Hydraulic high-pressure water cleaning system with 145-gal (150-l) plastic tank (for model with two track units)
    • Two hydraulic high-pressure water cleaning systems with two 145-gal (150-l) plastic tanks
    • Additional plastic water tank, 145 gal
    • Additional electrical water pump, 24 V, with 32 ft 10 in (10.0 m) hose and spray gun with handle
    • Self-leveling feature for transport mode
    • Rotating beacon, halogen 24 V, with magnetic base
    • Two LED floodlights including power generator (230 V)
    • Two LED floodlights including power generator (110 V)
    • High-performance lighting system including 4 LED working lights, 24 V, for illuminating the compaction compartment
    • Stringline tensioning system, complete with 3,280 ft (1,000 m) steel wire rope
    • Additional tensioning winch for stringline tensioning system
    • Stringline tensioning system, complete with 4 x 984 ft (4 x 300 m) nylon rope
    • Machine commissioning (day rate)
    • Export packaging

All machines are not available at all locations.

View Brochure

Main Technical Specifications
MAKE Wirtgen
MODEL WPS 62i

Why rent when you can own?

Call us to see if ownership makes economical sense for you and your organization.

Wirtgen WPS 62i

print
6715 W. Reno
Oklahoma City, OK 73127 Phone: 888.861.0219
www.kirby-smith.com
CUSTOMER
DATE
PRICE
SALESPERSON

New Wirtgen WPS 62i Placer/Spreader

If reinforcement needs to be laid in advance during the construction of concrete roadways, the concrete can be fed in laterally using a placer/spreader. The placer/spreader travels in front of the slipform paver over the pre-placed reinforcement, while a truck mixer feeds the belt conveyor with concrete from the side. The concrete is poured evenly over the pre-placed reinforcement, in front of the slipform paver, and distributed across the entire working width. Once the truck mixer is empty, the belt conveyor can be folded away in a very short time to clear the path for the next mixer.

The cost-effective two-track placer / spreader is designed for high-performance concrete feeding at widths of 12 ft to 24 ft and thicknesses of 19.7 in (500 mm).

The machine concept with a hydraulically telescoping machine frame and concrete strikeoff unit makes the machine highly adaptable to any job site situation.

The powerful, fast folding feeder conveyor features an intelligent control concept and guarantees maximum concrete availability for the slipform paver following behind it.

The fully modular machine design comes standard-equipped with hydraulic quick-change couplings for easy conversion, rapid transport, and maximum machine availability.

The machine can be precisely controlled via stringline scanning, via 3D applications without a stringline, or via WIRTGEN Autopilot 2.0.
GENERAL INFORMATION
Manufacturer
Wirtgen
Model Year
Model
WPS 62i
Condition
NEW
Specs
Strike Off
Wall: Modularly extendable up to 24'
Dimensions
Length
23’3”
Width
9’1”
Height
13’5”
Weight
74,957-88,185 lbs.
Height Adjustment
3’7”
Crawler Track
2
Engine
Engine Type
US EPA Tier 4f
Fuel Tank Capacity
106 Gallons
Engine/Drivetrain
Engine Make
Deutz
Engine Model
TCD 6.1 L6
Cylinders
6
Horsepower
241 HP
Cooling
Water
Displacement
370 in³
Fuel Consumption
12 gph (full load) 5 gph (2/3 load)
Emission Standards
Tier 4f
Hydraulic
Hydraulic Capacity
53.8 Gallons
Operational
Paving Speed
0 - 33 ft/min
Travel Speed - Forward
0 to 33 ft/min
Belt Conveyor Width
5'3"
Belt Conveyor Speed
0 to 9.8 ft/s
Position Units
B1: 11'1" x 12" x 2'2"
Belt Conveyor Folding Process
6 sec.
Electrical
Power Supply
24 V DC
Paving
Tracked or Wheeled
2 Crawler Tracks
Paving Width
12’-24’
Paving Depth
0-20”
Spreader/Auger
Two-piece, modularly extendable up to 24 ft
Slab Paving Application
Paving width: 12’-24’ Paving height: up to 20”
Hopper
Conveyor
Belt conveyor drive power: 94 kW

Legal Notice: Manufacturer Name, Logo and Model Information are Registered Trademarks of the Manufacturer.
Specifications and other information are subject to change without notice. No representation of accuracy is made.
Image is believed to be in the public domain or used with permission.
All machines are not available at all locations.
LOCATIONS
CAREERS
CONTACT