|
Truck-mounted spreaders are spreader units designed to be mounted on different carrier vehicles. Available hopper volumes include 12 m³, 16 m³, 18 m³, or 20 m³. Trucks of different sizes are usually used as carrier vehicles. Spreader units can also be mounted on dumpers, tracked vehicles, or special trucks upon request.
-
The MC series of binding agent spreaders are mounted on a carrier vehicle and are perfect for precise and computerized spreading of binding agents.
-
The fully automatic metering of the spreading quantity independent of the travel speed and the self-cleaning metering feeders ensure that the binding agent is spread uniformly and precisely.
-
The spreading unit in rotary design with separately controllable partial spreading widths delivers precise and high spreading performance.
-
A pneumatic filling device on both sides ensures that filling is fast and cost-effective.
-
Professional off-road and on-road use as a mobile binding agent spreader unit.
|
|
| Length |
29.69’ |
| Width |
8.36’ |
| Height |
11.15’ |
| Weight |
11,464 lbs. |
| Electrical System |
24 V/20A |
| Rated RPM |
700-800 RPM |
| Hydraulic Tank |
26.41 gal |
| Auxiliary Drive |
Minimum speed: 500 min
Required speed for max hydraulic power (spreading unit 230 mm-410 mm):
700 min (spreading unit 230 mm)
800 min (spreading unit 410 mm)
Max. permissible speed: 2600 min
Required torque:
400 Nm (spreading unit 230 mm)
570 Nm (spreading unit 410 mm) |
| Conveyor |
Width of Conveyor Chain-3.11’ |
| Working Width |
7’9” (2’8”/2’4”/2’8”) |
| Capacity |
706.3 cu ft (container) |
| Output |
plus/minus 53.64 HP /// plus/minus 64.36 HP |
| Hose |
Size of filling connector/filling hose-3”/4”/5” |
| Slide Gate |
1.14’ |
| Spreading Quantity |
0.02-1.5 gal/ft² at 1.2 mph |
- Working width/Partial widths: 7’9”
- Built-up empty weight: 11,464 lbs.
- Container capacity: 706.3 cu ft
- Required speed of the truck’s auxiliary drive for max. hydraulic power: 700-800 RPM
- Required power output of the truck’s auxiliary drive: ≥40 kw /48
- Required torque of the truck’s auxiliary drive: 400-570 Nm
- Size of filing connector/filing hose: 3”/4”/5”
- Max. permissible speed of the truck’s auxiliary drive: 2600 RPM
- Minimum speed of the truck’s auxiliary drive: 500 RPM
- Spreading quantity at 1.2 mph: 0.02-1.5 gal/ft²
- Container/Chassis
- Lockable side doors
- Loading and lashing lugs
- Subframe for the carrier vehicle
- Relief cover on the chain conveyor to prevent material building up in the container
- Vent pipe and pressure relief valve integrated into the container
- 3” pneumatic filling device on both sides, left and right
- Filling device with stone sieve
- Hydraulic slide gate
- Feed chute with two sensor-controlled transverse augers
- Sensor-controlled chain conveyor
- Drive system/Control system/On-board computer
- Closed on-board hydraulic system
- Hydraulic oil cooler
- Speed sensor mounted on the cardan shaft
- Radar unit for speed detection
- Control terminal
- Continuous adjustment of the spread rate
- Filling level indicator (container “full” or “empty”)
- OptiPower chain conveyor drive system on both sides
- Spreading unit
- Spreading unit size DN 230-10 in rotary feeder design
- Self-cleaning metering feeders
- Three separately controlled partial widths
- Fully automatic metering independent of the travel speed
- Miscellaneous
- Dust protection
- Access ladder
- Collecting pan and digital suspended scales for checking the spread rate
- Container/Chassis
- Storage compartments
- 4” pneumatic filling device on both sides, left and right
- Side underrun protection system
- Drive system/Control system/On-board computer
- “WeighTronic” electronic weighing device with automatic readjustment
- Auxiliary engine for operation independent of the carrier vehicle or tractor
- Spreading unit
- Low-volume spreading unit size DN 230-20 in rotary feeder design
- High-performance spreading unit size DN 410-17 in rotary feeder design
- Miscellaneous
- Bag filter package
- Filter system for automatic dust collection
- Job data printer for documenting binder consumption and area treated
- Rotary compressor for autonomous filling from a stationary silo and/or for cleaning the machine
- Monitor system for monitoring the working area behind the spreader
- Lighting system with 4 LED working lights
- Water spray system including water tank to reduce dust development during the spreading process
- High-pressure cleaner including water tank
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
