Why rent when you can own?
Call us to see if ownership makes economical sense for you and your organization.
Rehabilitating roads by replacing wearing course is a highly cost-effective and eco-friendly process, very popular in numerous countries. VÖGELE now present a cutting-edge concept, ideal not only for paving thin layers on spray seal or tack coat, hot on hot, but also highly interesting for many non-specialized road building companies.
The VÖGELE SprayJet module offers an economical and clean alternative wherever pre-spraying and subsequent paving are required.
|Length||AB 500 (TV): 19'8"
AB 500 (TP1): 20'1"
AB 600 (TV): 19'8"
AB 600 (TP1): 20'1"
|Weight||AB 500 (TV): 48,500 lbs.|
|Track Pad Width||Ground Contact: 9 ft. 3 in. x 1 ft.|
|Crawler Track||provided with rubber pads|
|Engine Type||Diesel engine|
|Fuel Tank Capacity||79 gallons|
|Engine Model||QSB 6.7 C164|
|Horsepower||Nominal: 170 HP/2,000 RPM
ECO Mode: 165 HP/1,700 RPM
|Speeds||Paving: up to 79 fpm
Travel: up to 2.8 mph
|Track Rollers||lifetime grease lubricated|
|Emission Standards||EU Stage 4, US EPA Tier 4f|
|Track Tension||spring assembly|
|Traction Drive||separate hydraulic drive and electronic control provided for each crawler track|
|Auger Height||Infinitely variable by 6", hydraulic (lowest position 4" above the ground)|
|Emulsion Tank||heated electrically, regulated by thermostat|
|Spray Bar||Width: extending from 8'4" to 19'8"
Number of units: 5
Distance between nozzles: 10"
|Lubrication System||centralized lubrication system with electrically driven grease pump for conveyor and auger bearings|
|Holding Capacity||550 gallons
Tank Shell: insulated against loss of heat
|Push Rollers||Hopper: oscillating, displaceable forwards by 3"|
Rate of Spread: 0.06 up to 0.33 lbs/sq.ft.
Spray Cone: 120°
Spraying Pressure: 43.6 psi (max)
|Screed Width||AB 500 (TV, TP1)
Basic width: 8'4"
Max width (TV, TP1): 27'11"
Max Spray width (TV, TP1): 19'8"
AB 600 (TV, TP1)
Basic width: 9'10"
Max width (TV, TP1): 29'6"
Max spray width (TV, TP1): 19'8"
|Spreader/Auger||2, with exchangeable auger blades, auger rotation reversible
Drive: Separate hydraulic drive provided for each auger
Speed: 84 rpm
|Hopper Capacity||28,660 lbs.|
|Conveyor||2, with replaceable feeder bars, conveyor movement reversible for a short time
Drive: Separate hydraulic drive provided for each conveyor
Speed: 108 fpm
|Hopper Height||Dump height: 23" (bottom of material hopper)|
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.