Why rent when you can own?
Call us to see if ownership makes economical sense for you and your organization.
The NTC55 is the next evolution in truck mounted cranes. Rock solid operating performance coupled with modern features take the NTC55 to the next level when compared to the average boom truck.
Boom length available:
Extreme versatility and strength: With four outrigger configurations, four counterweight configurations, a premium commercial truck chassis for superior roading performance, and a 49,9 t (55 USt) capacity, the NTC55 is the ideal crane for your fleet.
Five-section boom: The NTC55 is equipped with a 39,0 m (128 ft) boom. An optional 7,9 m (26 ft) fixed length offsettable jib and a 7,9 m – 13,7 m (26 ft – 45 ft) two-section offsettable manual extension is available.
Operator-focused design: The NTC55 is designed specifically with the operator in mind, with up to 20˚ cab tilt, a graphical RCL with integrated control system, and lighter polymeric outrigger floats for easy setup.
Four-position outriggers: Equipped with left and right ground-level and in-cab CANbus outrigger controls, the NTC55’s outriggers allow for quick and easy crane setup. An outrigger beam position system aids the operator in selecting the right load chart based on the crane’s outrigger footprint. The front outrigger box has an X-shaped footprint that eliminates the need for a single front outrigger. Load charts are available for 100%, 75%, 50% and fully retracted spans.
|Chassis||Torsion-resistant, high-strength steel sub frame attached using high-strength steel mounting brackets that are welded to the sub-frame and bolted to the truck chassis using Huck® bolts to ensure a secure and maintenance-free connection. Rear bumper under ride protection standard. Fixed boom rest mounted to front outrigger box and fabricated from structural steel.|
|Cab||Cab structure: rigid galvanealed steel structure, well insulated, offering optimum operator visibility and comfort. Equipped with tilting cab feature from horizontal to +20°, tinted safety glass, fixed front window with windshield wiper and washer, sliding skylight window with windshield wiper, sliding left side glass door, sliding right side window for ventilation w/ safety grille, tilting rear window for ventilation, four
way adjustable, cushioned seat and armrests with seat belt, diesel-fired warm-water heater with air ducts at operators feet, left side of cab and front dash — standard, hydraulic-powered air conditioner — standard, circulation fan, bubble level, adjustable sun visor, dome light, cup holder, fire extinguisher, load chart binder with tear-proof paper load charts and operator manual.
|Slew||Continuous 360° rotation using (1) low speed, high torque motor with a manually adjustable swing adjustment valve integrated to the hydraulic motor control manifold mounted to a planetary reduction gear. A proportional electronic brake pedal located in the operator cab allows for the dynamic application of the multi-disk swing brake circuit. A separate spring-applied, hydraulic-released brake for disabling rotation can be activated from the left-hand seat armrest. Free-swing functionality is disabled when using the optional crane radio remote control.|
|Gross Axle Wt Rating (GAWR)||Front: 20,000 lbs.
Rear: 40,000-66,000 lbs.
Pusher: 8,000 lbs.
Tag: 8,000-13,200 lbs.
|Max Tip Height||179'|
|Hydraulic System||Efficient closed-center, load sense hydraulics system featuring load-sharing technology allowing for smooth multifunction operation of all crane functions. One (1) SAE-C mounted, 130cc axial piston pump for all functions and optimized system performance. Shaft input of 2200 RPM generating 286 lpm (76 gpm) max flow at 320 bar (4600 psi) max operating pressure. 351 L (100 gal) hydraulic reservoir with SAE o-ring connections and integrated butterfly shut-off valve for easy maintenance. SAE o-ring hydraulic fittings and hoses throughout. Boom lift, boom telescope, main and aux hoist(s) and vertical outrigger jacks are all equipped with counterbalance valves for controlled movement and load holding.
Hydraulic oil cooler: standard electric fan, plate and fin style oil cooler mounted in the rear of the superstructure to remove heat from the hydraulic oil under heavy operating conditions.
|Outriggers||Outrigger controls: front console mounted electronic keypad allowing the operator to activate all horizontal beams and vertical jacks. Pre-selection capabilities to easily activate more than one function for ease of setup.|
|Boom||Includes proportional extension via multi-stage hydraulic cylinder and cable operation, four-plate, high-strength steel construction, three-sheave, quick reeve boom nose and Easy-Glide wear pads.|
|Boom Elevation||One (1) double-acting, hydraulic cylinder with integral holding valve with integral pressure transducers provides elevation from -8° to +80°.|
|Electrical System||Automotive grade, fully wire harnessed 12VDC electrical system using state-of-the-art sealed connectors and control modules. Dual-tone backup and outrigger motion alarm located at rear of machine. LED marker and triple ID lights.|
|Weight||48,650 lbs. w/fluids|
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.