New Morbark Eeger Beever 1415 Brush Chipper for Sale

Perfect for utility line clearing, residential tree services, rental yards and municipalities, this powerful and compact model is easy to maneuver. The Eeger Beever 1415 is also available with tracks for right of way clearing, highway clean-ups and hard to reach areas requiring a self-propelled unit for material access. The direct driven dual feed wheel system with serrated teeth and knife bar combination and end cap ripper teeth allow positive material feeding and reduced material wrapping around the feed wheel shaft for increased feeding efficiency.

Require more features than the Eeger Beever 1215 Chipper offers? Elevate to the Eeger Beever 1415 Brush Chipper with additional features such as dual feed wheels, hydraulic lift, and crush, larger infeed (throat) opening, higher horsepower, manual crank swivel discharge, and available winch package option. Also available with tracks, the Eeger Beever 1415 Chipper is versatile and the ideal machine for utility line clearing, residential tree services, municipalities, and more.

Remove the anxiety of engaging the chipper drum, damaged drive belts, burned clutch discs, and elevate your operating experience with the exclusive Morbark ZeroClutch™ – available now on select engine packages.  Simply start, throttle the machine to full RPMs, and engage the feed control bar. The Morbark ZeroClutch features an integrated drum speed sensor that monitors the drum speed and will not allow the clutch to engage if material is lodged between the feed wheel and drum or the discharge chute is plugged.

With its power and easily transportable design, the compact and economical Eeger Beever 1415 Track brush chipper is the ideal unit for right-of-way and utility line clearing, highway clean-ups, residential tree services, rental yards and municipalities.

The direct driven dual feed wheel system with serrated teeth and knife bar combination and end cap ripper teeth allow positive material feeding and reduced material wrapping around the feed wheel shaft for increased feeding efficiency

• INFEED: The 60″ wide x 31″ (152.4 cm x 78.74 cm) high chute opening and 15″ wide x 14″ (38.1 cm x 35.56 cm) high throat opening allows for easy feeding of branchy material and reduced saw labor.
• HYDRA-LIFT SYSTEM: The Hydra-Lift™ compression system with spring-assisted down pressure aids in feeding difficult limbs.
• 360° SWIVEL DISCHARGE: 360° swivel discharge with chip deflectors puts chips right where they’re needed without removing the chipper from the tow vehicle.
• TRACK UNDERCARRIAGE OPTION: Take the chipper to the material with a two-speed, 72″ long x 11.5″ wide (182.9 cm x 29.2 cm), turf-friendly rubber track undercarriage and 4.95 PSI (34.1 kPa) ground pressure.
• Hydraulic lift and crush allows the operator to raise the feed wheel to ease material feeding and provides additional crushing power for stubborn and hard to break down material
• Full-length channel frame extends beneath the infeed for increased structural support.
• Extendable drawbar with two (2) pinned extensions allows greater flexibility when mating to the tow vehicle
• Choice of gasoline or diesel engine packages.
• Direct drive dual feed wheel compression system amplifies material pulling power
• Dual-sided air impeller system increases discharge air velocity to aid in discharging fibrous, light, and leafy material
• Large infeed perimeter opening allows ample room to feed material, reducing saw and trim labor
• Choice of gasoline or diesel engine packages
• Staggered pocket drum with two (2) dual-edged chipper knives
• Reversing automatic feed system
• 360° manual swivel discharge with multiple locking positions
• Caterpillar C3.4, 74HP, Tier 4F diesel engine package
• 360° hydraulic swivel discharge with adjustable height puts chips right where they’re needed.
• The powerful dual feed wheel system generates more than 3,300 lb/ft (4,474 Nm) of pulling force. The Hydra-Lift™ compression system with spring-assisted down pressure aids in feeding difficult limbs.
• Drive belt inspection cover provides easy access for drive system maintenance.
• The 31" high x 60" wide (78.7 x 152.4 cm) chute opening and 14" high x 15" wide (35.6 x 38.1 cm) throat opening allows for easy feeding of material and reduced saw labor.
• Take the chipper to the material with a two-speed, 72" long x 11.5" wide (188.9 cm x 29.2 cm) track undercarriage and 4.95 PSI (34.1 kPa) ground pressure.

Models

• Brush Chipper
• Track Brush Chipper