Why rent when you can own?
Call us to see if ownership makes economical sense for you and your organization.
The Manitowoc MLC165-1 provides a broad range of features that will undoubtedly be translated into jobsite benefits that increase productivity and save money.
Crawler Connection: Each crawler is FACT™ aligned and securely fastened to the carbody with hydraulic powered pins for fast, easy assembly. Hydraulic connections utilize screw style quick disconnect couplers.
Counterweight: Single part number for upperworks counterweight can be stacked in any order, and raised into position using optional self-assembly counterweight raising cylinders. Counterweight tray is retained in position using hydraulic powered pins with incorporated locking system for quick and hasselfree installation.
Asset Utilization: The MLC165-1 is able to be equipped with attachments that are already in common in the field. The No. 134 fixed jib has been used on the 777, 888, 999, 14000 and MLC165. In addition the No. 135 luffing jib has been used on the 888, 999, 14000 and MLC165
CraneSTAR is an exclusive and innovative crane asset management system that helps improve your profitability and reduce costs by remotely monitoring critical crane data. Visit www.cranestar.com for more information.
|Cab||Fully enclosed and galvaneeled steel insulated module is equipped with sliding door, large safety glass windows on all sides and roof. Signal horn, cab space heater, front and roof windshield wipers, air conditioning, dome light, sun visor and shade, fire extinguisher and air circulating fan are standard.
Additional optional: External RCI light.
|Width||9 ft. 10 in.|
|Height||10 ft. 6 in.|
|Track Width||Crawler: 4 ft. 4 in.|
|Engine Type||Tier 4 Final|
|Max Travel Speed||1.9 mph|
|Fuel Tank Capacity||163 gal.|
|Control System||Hydraulic pilot controls provide infinite speed response directly proportional to control lever movement. Controls include Manitowoc’s CANBUS operating system providing microprocessor driven control logic, pump control, on-board diagnostics and service information. Block-up limit control is standard for hoist and whip lines. RCL/RCI (Rated Capacity Limiter/Rated Capacity Indicator) system is standard for main boom and upper boom point. “Function cut-out” or “warning only” operation is available via programmable configuration. Travel and swing alarms are standard|
|Hydraulic Capacity||158 Gallons|
|Hydraulic System||Three high-pressure pumps are driven by the engine. Two pumps provide hydraulic power enabling simultaneous multi-function capability. One pump provides independent "closed loop" hydraulic power for the swing system. An additional fourth pump is required for free fall. Hydraulic reservoir capacity is 158 gallon and is equipped with breather, sight and electrical level indicator, clean out access, and internal diffuser. Each function is equipped with relief valves to protect the hydraulic circuit from overload or shock. Replaceable, ten micron (absolute) full flow tank filter is furnished in the hydraulic circuit. All oil is filtered prior to return to the hydraulic reservoir. Hydraulic system also includes hydraulic oil cooler.|
|Counterweight||Counterweight raising cylinders are mounted in the rotating bed with chain connecting the top of the cylinders and the counterweight tray. The upper counterweight is secured to the rotating bed with hydraulically actuated pins. Upper counterweight consists of a one-piece tray and eight upper counterweight boxes. Series 2 carbody counterweight boxes are attached to carbody (each side) and weigh 22,500 lb
Series 1: Upper counterweight (6 pieces+tray) 101,450 lb
Series 2: Upper counterweight (8 pieces+tray) 123,500 lb
Carbody counterweight (2 pieces) 45,000 lb
Total counterweight 168,500 lb
|Drum||Two equal width winches are driven by independent variable displacement axial piston hydraulic motors through planetary reduction. Drums are grooved for 26 mm rope. Powered hoisting/lowering operation is standard with automatic (spring applied, hydraulically released) multi-disc brakes, and drum rotation indicators.
Optional: free-fall operation for front and/or rear drums.
Optional: auxiliary (third) hydraulic powered drum mounted in boom butt. Includes third drum control system. Auxiliary drum may be used as the luffing hoist when machine is equipped with a luffing jib.
Optional: auxiliary drum preparation includes electric wiring, controls, hydraulic selector valve and plumbing.
|Swing||Independent single swing drive mounted in rotating bed is powered by a hydraulic piston type motor driving a spur gear through a planetary reduction. Internal brake and four position manual swing lock is provided.|
|Swing Speed||2.5 RPM|
|Jib||Max. Fixed: 80 ft.
Max. Luffing: 170 ft.
|Max Boom Length||275 ft.|
|Max Jib Length||Luffing: 170’|
|Max Capacity||182 USt|
|Fixed Jib on Main Boom||80’|
|Boom Hoist||Independent boom hoist consists of a single drum grooved for 22 mm diameter wire rope. Includes 22 mm diameter wire rope for 18 part line reeving. Drum is powered by a fixed displacement hydraulic motor coupled to an internal brake and planetary gearbox equipped with ratchet and pawl.|
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.