Want to rent it?
Do you want to know if renting makes more economical sense?
Call us and find out today.
75 X3 Spin Ace
Spin Ace Minimum Swing Radius Excavators get you in and out of tight work spaces easily.
Spin Ace® excavators are packed with all the power, productivity, and fuel-efficiency you’ve come to expect from us…along with a minimum swing radius design for better maneuverability at sites where work space is at a premium. Thoughtful redesign of counterweights and boom placement makes them ideal for urban construction sites, traffic-restricted road maintenance, utility work or other jobs with limited maneuvering space.
Built with simplicity in mind, these excavators are no-nonsense workhorses powered by dependable Isuzu engines. Spin-Ace cabs feature wide, low-noise interior space, excellent all-around visibility and comfortable operator's seats.
| Body | |
|---|---|
| Cab | ROPS certified cab with climate control A/C and heat with defroster, Control panel with LCD Hi-Definition color monitor, Rearview camera display, Fuel-efficiency gauge, Low-effort joysticks pre-wired for auxiliary hydraulics, Control pattern changer, Safety glass windows, Sunroof with sunshade, Shockless cab suspension with four fluid mountings, SCM reclining suspension seat, AM/FM sound system with MP3 auxiliary input jack, Digital clock, Dome light, Seat belt, Coat hook, Cup holder, Storage compartments, Floor mat, Footrests, 12-volt outlet, Travel alarm, Handrails, Mirrors, Cab light, Side-entry cab filter, Spare parts kit. |
| Controls | Three selectable working modes, Anti-theft password protection system, On-board selfdiagnostic system with memory and service interval reminders, Auto-idling system, Onetouch decelerator, Auto-idle engine shutdown, Neutral safety start, Gate-lock safety shutoff. |
| Dimensions | |
|---|---|
| Length | 11’2”-21’4” |
| Width | 7’7” |
| Height | 6’1” |
| Weight | 17,400 lbs. (Mono Boom Excavator) 18,300 lbs. (Offset Boom Excavator) |
| Fuel Tank Capacity | 31.7 Gallons |
| Maximum Reach Ground | 20’7” (5'7" Arm) 22’2” (7'2" Arm) 20’10” (5'9" Arm) 21’10” (6'11" Arm)\ |
| Engine | |
|---|---|
| Engine Make | Isuzu |
| Engine Model | AP-4LE2X |
| Engine Type | Final Tier 4 Turbocharged diesel engine w/electronic control (ECM) and high pressure common-rail fuel injection |
| Cylinders | 4 |
| Net Horsepower | 54 HP |
| Cooling | Water-cooled |
| Displacement | 133 cu in |
| Torque | 142 lbf-ft @ 1800 rpm |
| Drivetrain | |
|---|---|
| Starter | 24V-3.2kW |
| Gradeability | 70% (35°) |
| Drawbar Pull | 13,400 lbf |
| Alternator | 50 amp |
| Track Rollers | 5 per side |
| Ground Pressure | Mono Boom: 5.08 psi Offset Boom: 5.37 psi |
| Carrier Rollers | 1 per side |
| Hydraulic | |
|---|---|
| Pump | Pump Output: 2 x 19.6 GPM Pilot Pump Max. Flow: 4.8 GPM Blade Pump Max. Flow: 9.4 GPM |
| Hydraulic Tank Capacity | 13.5 Gallons |
| Hydraulic System | Open-center system, Two variable-displacement axial-piston pumps and one gear pump for pilot controls, Main control valve with one 4-spool section and one 5-spool section with auxiliary spool, One-spool valve for blade, Auxiliary Control System, Oil cooler, Boom holding valve, 6 micron return filter, Firewall. |
| Hydraulic Cylinders | Number of cylinders-bore x rod x stroke Boom: 1-4.5” x 2.9” x 33.5” Arm: 1-3.9” x 2.5” x 29.7” Offset Arm Cylinder: 1-3.7” x 2.4” x 26.9” Offset Cylinder: 1-3.9” x 2.2” x 12.4” Bucket: 1-3.3’ x 2.2” x 26.2” Blade: 1-4.3” x 2.8” x 7.1” |
| Relief Valve Setting | Boom/Arm/Bucket: 4,260 PSI Swing Circuit: 3,280 PSI Pilot Pump Working Circuit Pressure: 570 PSI Blade Pump Working Circuit Pressure: 3,410 PSI Travel Circuit: 4,260 PSI |
| Operational | |
|---|---|
| Dig Depth | 13’7” (5'7" Arm) 15’2” (7'2" Arm) 13’11” (5'9" Arm) 15’1” (6'11" Arm) |
| Dig Height | 24’2” (5'7" Arm) 25’6” (7'2" Arm) 24’3” (5'9" Arm) 24’11” (6'11" Arm) |
| Bucket Digging Force | 12,800 lbf |
| Dump Height | 17’4” (5'7" Arm) 18’7” (7'2" Arm) 17’5” (5'9" Arm) 18’1” (6'11" Arm) |
| Bucket Capacity | 0.24-0.71 cu yds |
| Travel Speed - Forward | 2.0-3.2 mph |
| Maximum Reach | 21’ (5'7" Arm) 22’7” (7'2" Arm) 21’4” (5'9" Arm) 22’3” (6'11" Arm) |
| Tail Swing Radius | 4’9” |
| Swing | Planetary reduction powered by axial-piston motor, Internal ring gear with grease cavity for swing pinion, Swing bearing is single-row, shear type ball bearing, Mechanical disc swing brake, Auto-power swing. |
| Max. Arm Digging Force | 8,880 lbf |
| Swing Torque | 12,500 lbf-ft |
| Swing Speed | 10.4 rpm |
| Track Link Pitch | 6.06” |
| Shoes | 39 per side |
| Shoe Width | 17.7” |
| Tail Swing | 4’9” |
| Bucket Rotation | 177° |
| Battery | |
|---|---|
| Battery | (2) 12-volt 64 amp hours |
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
New Equipment Sales only available in assigned territories where Kirby-Smith Machinery, Inc. is a licensed distributor. Not all manufacturer's brands available at each location. Please contact your local Kirby-Smith branch if you have questions regarding availability.
| Main Technical Specifications | |
|---|---|
| MAKE | Link-Belt |
| MODEL | 75 X3 SA |
Do you want to know if renting makes more economical sense?
Call us and find out today.
