LeeBoy 4130

The LeeBoy 4130 road widener is a versatile machine that meets your road widening needs. The narrow width design allows for shipping without a permit while shiftable conveyor and foldable hopper wings allow precise placement of material to either side of the machine. Operator console easily shifts from side-to-side and allows a clear view into the front hopper and of the material flow to the strike-off. A tilting front hopper improves trailer load angle to 14.50. Extendable push rollers insure a variety of trucks can be used to feed the hopper.
Specs
Strike Off Contoured strike off for controlled spread of material width, depth and slope
Basic strike off consist of one 1’ and one 2’-3’ section, extendable
On board storage for strike offs and strike off supports
Operators Control Dual control stations, each equipped with Foot actuated conveyor function switch
Control functions on the operator’s console: Main power, starter throttle, horn, conveyor speed, shuttle and discharge direction, strike off life and lateral movement, hopper wing, steering, parking brakes
Body
Brakes Primary: hydrostatic traction drive
Parking: controlled by electric switch on operator’s console; failsafe
Service: Foot pedal hydraulic
Tires Two 385/65R 22.5 radial
Two 425/65R 22.5 radial
Dimensions
Length 20’6”
Width 8’6” (shipping)
9’8” (working)
Height 8’9”
Weight 22,670 lbs.
Wheelbase 9’9”
Engine
Horsepower 74 HP
Fuel Tank Capacity 51 Gallons
Hydraulic
Hydraulic Capacity 61 Gallons
Operational
Hopper Tilting 14.5 degrees load angle
Two bearing equipped push rollers, truck entry 9’3”
Conveyor Belt Width 24” (high temperature service nitrile belt traveling on tapered roller bearing support rollers
Hopper Capacity 2.2 cubic yards
Spreader Width Up to 8’
Conveyor Speed 0 to 448’ per minute (5.09 mph)
Conveyor System Independent, variable speed, hydrostatic, dual end drive system
Shiftable up to 18” side to side
Material Spread Raised, lowered, extended and retracted hydraulically with manual stops for fine adjustment of elevation and slope
Outer edger plate assemble included
Spreader Height 12” above and below grade
  • 74 hp (55 kw) Cummings Tier 4 Final Engine
  • Width of Spread: up to 8’ (2.44 m)
  • Contoured Strike-Off
  • 8’ 6” Shipping Width - No Permit Required
  • 24” (.609 m) Wide Heat-Resistant Conveyor Belt
  • 2.2 Cubic Yards Hopper Capacity
  • Tilting Hopper, 14.50 Load Angle
  • Dual-Position Control Station
  • Hydrostatic Drive and Traction Control System
  • Extendable Push Rollers
  • Unobstructed View from the Operator’s Station
  • Conveyor System
    • Equipped with adjustable wipers to prevent material buildup
  • Instrumentation
    • PV480 digital display for:
    • Engine oil pressure
    • Water temperature
    • Voltmeter and hydraulic oil temperature
    • Tachometer
    • Hour meter
    • Engine RPMS
  • Dual strike-off group
  • 1' contoured strike-off section
  • 3' contoured strike-off section
  • 2-3' telescoping contoured strike-off section, only one mounted per side
  • TopCon P-32 system controls-single grade and slope, sonic
  • Washdown system with 2 hose reels and 7 gal Ion tank
  • Umbrella
  • Truck Hitch

*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.

*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.

New Equipment Sales only available in assigned territories where Kirby-Smith Machinery, Inc. is a licensed distributor. Not all manufacturer's brands available at each location. Please contact your local Kirby-Smith branch if you have questions regarding availability.

View Brochure

Main Technical Specifications
MAKE LeeBoy
MODEL 4130

Want to rent it?

Do you want to know if renting makes more economical sense?
Call us and find out today.

LeeBoy 4130

print
6715 W. Reno
Oklahoma City, OK 73127 Phone: 888.861.0219
www.kirby-smith.com
CUSTOMER
DATE
PRICE
SALESPERSON

The LeeBoy 4130 road widener is a versatile machine that meets your road widening needs. The narrow width design allows for shipping without a permit while shiftable conveyor and foldable hopper wings allow precise placement of material to either side of the machine. Operator console easily shifts from side-to-side and allows a clear view into the front hopper and of the material flow to the strike-off. A tilting front hopper improves trailer load angle to 14.50. Extendable push rollers insure a variety of trucks can be used to feed the hopper.
GENERAL INFORMATION
Manufacturer
LeeBoy
Model Year
Model
4130
Condition
NEW
Specs
Strike Off
Contoured strike off for controlled spread of material width, depth and slope Basic strike off consist of one 1’ and one 2’-3’ section, extendable On board storage for strike offs and strike off supports
Operators Control
Dual control stations, each equipped with Foot actuated conveyor function switch Control functions on the operator’s console: Main power, starter throttle, horn, conveyor speed, shuttle and discharge direction, strike off life and lateral movement, hopper wing, steering, parking brakes
Body
Brakes
Primary: hydrostatic traction drive Parking: controlled by electric switch on operator’s console; failsafe Service: Foot pedal hydraulic
Tires
Two 385/65R 22.5 radial Two 425/65R 22.5 radial
Dimensions
Length
20’6”
Width
8’6” (shipping) 9’8” (working)
Height
8’9”
Weight
22,670 lbs.
Wheelbase
9’9”
Engine
Horsepower
74 HP
Fuel Tank Capacity
51 Gallons
Hydraulic
Hydraulic Capacity
61 Gallons
Operational
Hopper
Tilting 14.5 degrees load angle Two bearing equipped push rollers, truck entry 9’3”
Conveyor Belt Width
24” (high temperature service nitrile belt traveling on tapered roller bearing support rollers
Hopper Capacity
2.2 cubic yards
Spreader Width
Up to 8’
Conveyor Speed
0 to 448’ per minute (5.09 mph)
Conveyor System
Independent, variable speed, hydrostatic, dual end drive system Shiftable up to 18” side to side
Material Spread
Raised, lowered, extended and retracted hydraulically with manual stops for fine adjustment of elevation and slope Outer edger plate assemble included
Spreader Height
12” above and below grade

Legal Notice: Manufacturer Name, Logo and Model Information are Registered Trademarks of the Manufacturer.
Specifications and other information are subject to change without notice. No representation of accuracy is made.
Image is believed to be in the public domain or used with permission.
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.

New Equipment Sales only available in assigned territories where Kirby-Smith Machinery, Inc. is a licensed distributor. Not all manufacturer's brands available at each location. Please contact your local Kirby-Smith branch if you have questions regarding availability.
LOCATIONS
CAREERS
CONTACT