Komatsu PC2000-11

New Excavator for Sale

New Komatsu PC2000-11 Excavator for Sale

Mining excavators are called on to do a variety of tasks, from working a shot face to top loading trucks with overburden to cracking out a virgin bank.  Komatsu large excavators are designed to do all those tasks fast and efficiently to maximize production.

Similar to the PC2000-8, the PC2000-11 is equipped with selectable working modes to tailor machine performance to application requirements. The addition of the all new “Power Plus” mode, in combination with nearly 10% more available engine horsepower, a more efficient hydraulic system, and new engine-pump control logic allow for significantly improved multifunction performance, providing a productivity increase up to 12% when compared to the PC2000-8.

Komatsu also offers P&H electric rope shovels that provide the lowest cost-per-ton solution for high performance mining operations. Learn more about our electric rope shovels here.

  • PRODUCTIVITY, EFFICIENCY, AND MULTIFUNCTION PERFORMANCE
    • Faster cycle times and improved multifunction performance
    • Tier 4 Final emission-compliant engine with 1,046 net horsepower
    • Four selectable working modes to tailor machine performance to operating conditions
    • Power Plus (P+) mode increases productivity up to 12%
    • Redesigned hydraulic system monitors work equipment loads and optimizes hydraulic flow, based on operating conditions
    • Swing priority valve makes sure swing speed is available when needed
    • Auto deceleration, auto-low idle, and auto idle shutdown
  • RELIABILITY AND DURABILITY
    • Thicker, stronger boom plates and castings, highly resistant to bending and torsional stresses
    • Strengthened center and track frame
    • Larger diameter carrier rollers for extended service life
    • New sealing package on work equipment cylinders to withstand the most abrasive applications
    • Power module makes installation and removal of components easier, and reduces overhaul hours and cost.
  • ACCESS AND OPERATOR COMFORT
    • Operator's cab OPG level 2 (ISO 10262)
    • Hydraulically operated stairway with 45° access
    • Secondary engine stop switches located at ground level, along walkway, and in cabin
    • Fuel shut off valves located at ground level and along walkway
    • Air-suspension seat, heated, with console-mounted arm rests
    • Two automatic, large capacity air conditioning units
    • Extremely quiet, air pressurized cab, with a dynamic noise of 64.1 dB(A)
  • INFORMATION, COMMUNICATION, AND TECHNOLOGY
    • 7-inch, advanced, machine monitoring system with onboard diagnostics, no laptop required
    • KomVision, bird's-eye view, 7-camera system with dedicated 10-inch display
    • Operator ID records KOMTRAX machine operation and application data
    • KOMTRAX Plus, for immediate diagnostics of machine health and performance
    • Fleet Management via KOMTRAX Plus and/or available integration with 3rd party telematics systems
Body
Steering Two levers with pedals
Dimensions
Length 55’10”
Width 25’6” (overall installed)
20’7” (Upper width L/R walkways walkway removed))
1’ (width of R walkway)
Height 23’5” (to top of boom)
25’ (to top of cab)
Weight 445,179-456,926 lbs.
Ground Clearance 6’10” (counterweight)
2’8” (minimum)
Fuel Tank Capacity 898.2 US Gallons
Bucket Weight 24,000 lbs.-28,800 lbs.
Engine
Engine Make Komatsu
Engine Model SAA12V140E-7
Engine Type Direct Injection
Cylinders 12
Horsepower 1046
Cooling Water-cooled
Bore x Stroke 5.51” x 6.50”
Governor All-speed, eletrontic
Rated RPM 1800
Aspiration Turbocharged, aftercooled, cooled, EGR
Cycles 4
Piston Displacement 1860 in³
Drivetrain
Brakes Parking: Oil disc brakes
Gradeability 70%, 35°
Track Length 24’5”
18’11” (on ground)
Track Rollers 8 (each side)
Ground Pressure 22.8-27.9 PSI
Carrier Rollers 3 (each side)
Track Adjuster Grease
Hydraulic
Pump Variable capacity piston pumps
Pumps for Boom, arm, bucket, swing, and travel circuits
Std Pump Flow 612 gal/min (attachment, swing and travel)
85.6 gal/min (fan drive)
Hydraulic Tank Capacity 343.4 US Gallons
Hydraulic Flow 612 gal/min (for attachment, swing and travel)
85.6 gal/min (for fan drive)
Hydraulic Cylinders Number of cylinders-bore x stroke
Backhoe Boom: 2-11.8” x 104.2”
Backhoe Arm: 2-9.8” x 84.2”
Backhoe Bucket: 2-7.9” x 85.4”
Relief Valve Setting Backhoe circuit: 4,270 psi
Travel circuit: 4,760 psi
Swing circuit: 4,270 psi
Pilot circuit: 464 psi
Hydraulic Working Modes 3
Hydraulic Motors Travel: 2 x axial piston motors with parking brake
Swing: 2 x axial piston motor with swing holding brake
Hydraulics Open-center load sensing system, 3 selectable working modes
Operational
Bucket Width 102”-107”
Dig Depth 30’4”
Dig Height 44’0”
Arm Length 12’10”
Dump Height 28’5”
Bucket Capacity 15.7-17.9 yd³
Travel Speed - Forward 1.7 mph
Boom Length 28’7”
Tail Swing Radius 19’7”
Swing Speed 4.8 RPM
Shoes 49 (each side)
Track Gauge 15’1”
Swing Reduction 2 x Planetary gear
Swing Circle Lubrication Grease-bathed
Swing Lock Oil disc brakes
Hydraulic Type Open-center load sensing sytem
Digging Reach 51’9”
50’3” (at ground level)
Swing Gear 2 x Planetary gear
  • ENGINE AND RELATED ITEMS:
    • Air cleaner, double element dry
    • Automatic engine warm-up system
    • Electric priming pump for fuel
    • Engine, Komatsu SAA12V140E-7 turbocharged, U.S. EPA Tier 4 Final certified.
    • Fuel pre-filters with water separators
    • Two cooling fans with fan guard (Hydraulic drive, for radiator and oil cooler), reversible
  • ELECTRICAL SYSTEM:
    • Alternators, 24 V/2 x 90 A
    • Auto decelerator and auto idling system
    • Auto idle shutdown (adjustable)
    • Batteries, 4 x 12 V/140 Ah
    • Battery isolator and starting motor isolator
    • Circuit breakers
    • Electrical engine oil pan heater and coolant heater
    • Horn interconnected with warning light
    • Ladder operating alarm
    • Lever lock auto-lock
    • Lighting switches instrument panel
    • Radio w/ auxiliary input (3.5 mm jack)
    • Rear working light
    • Secondary engine stop switch (ground access)
    • Starting motors, 2 x 11 kW
    • Working lights, 4 boom, 4 cab base, 3 fuel tank top front, 1 left front and 1 left under cab side catwalk, LED lamp system (2 lamps)
  • GUARDS AND COVERS:
    • Dust resistant net for radiator and oil cooler
    • Pump/engine room partition cover
    • Power module under cover
    • Travel motor guard
  • DRIVE SYSTEM:
    • Planetary travel gear with axial piston motor
    • Travel parking brake
  • HYDRAULIC SYSTEM:
    • 4 variable displacement piston pumps (2 tandem pumps) for work equipment, travel and swing, 2 variable displacement piston pumps (1 tandem pump) for fan drive
    • Control levers for work equipment and swing with PPC system
    • Control levers and pedals for travel with PPC system
    • Drain-filters for pumps & motors
    • Electric open-center load sensing system
    • Four control valves (two integrated valves) for work equipment, swing and travel
    • Heavy lift mode
    • High-pressure in-line oil filters
    • Oil cooler
    • One axial piston motor per track for travel with counterbalance valve
    • Optimized electrical valve control for smooth and efficient compound movement
    • Shockless boom control
    • Two axial piston motors for swing with single stage relief valve
    • Two-mode pressure setting for boom
  • OPERATOR'S CAB:
    • Automatic air conditioners (Twin)
    • Built-in top guard conforming to OPG level 2 (ISO10262)
    • KomVision, all round monitoring system
    • Large damper mounted and pressurized mining shovel cab with large windshield, lockable door, large twin wipers and washers, floor mats, cigarette lighter, ashtray, 12V power supply x 2, and cup holders
    • Large high resolution LCD color monitor
    • Lock lever
    • Rearview monitoring system
    • Seat belt indicator
    • Seat belt, 78 mm 3"
    • Seat, heated, high back, fully adjustable air suspension with retractable seat belt
    • Sun shield
    • Trainer's seat
  • OTHER STANDARD EQUIPMENT:
    • Automatic swing holding brake
    • Beacon, 2 (Cab top, engine hood)
    • Dual rearview mirrors
    • Emergency engine stop switch and fuel cut-off lever
    • Fuel tank, 3400 L 898.2 U.S. Gal
    • Fully-automatic greasing system with 200 L 52.8 U.S. Gal
    • Fully hydraulic operated stairway and full 45° access to cab
    • General tool kit
    • Jump start receptacle
    • KOMTRAX Plus (vehicle health monitoring system)
    • Light in machine cab
    • Maintenance light
    • Manual grease gun for track adjuster
    • PM tune-up service connection
    • Rear reflectors
    • Satellite communication system for KOMTRAX Plus (Iridium)
    • Service center system, full quick charge system (grease, oils, fuel, coolant)
    • Slip-resistant plates
    • Step light with timer
    • Travel alarm
    • Wide catwalk and large handrail
  • UNDERCARRIAGE:
    • 810 mm 32" double grouser shoes
    • 8 track rollers/3 carrier rollers (Each side)
    • Hydraulic Idler Cushion (HIC) with shock absorbing accumulator
    • Track guiding guard (Separate type)
  • 1010 mm 40" triple grouser shoes
  • 3900 mm 12'10" backhoe arm assembly
  • 8700 mm 28'7" backhoe boom assembly
  • Coolant heater, fuel combustion type
  • Full length track guiding guards
  • Heavy-duty rock bucket

*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
 

*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.

New Equipment Sales only available in assigned territories where Kirby-Smith Machinery, Inc. is a licensed distributor. Not all manufacturer's brands available at each location. Please contact your local Kirby-Smith branch if you have questions regarding availability.

Komatsu’s Comparison Tools

View Brochure

Main Technical Specifications
MAKE Komatsu
MODEL PC2000-11

Want to rent it?

Do you want to know if renting makes more economical sense?
Call us and find out today.

Komatsu PC2000-11

print
6715 W. Reno
Oklahoma City, OK 73127 Phone: 888.861.0219
www.kirby-smith.com
CUSTOMER
DATE
PRICE
SALESPERSON

New Komatsu PC2000-11 Excavator for Sale

Mining excavators are called on to do a variety of tasks, from working a shot face to top loading trucks with overburden to cracking out a virgin bank.  Komatsu large excavators are designed to do all those tasks fast and efficiently to maximize production.

Similar to the PC2000-8, the PC2000-11 is equipped with selectable working modes to tailor machine performance to application requirements. The addition of the all new “Power Plus” mode, in combination with nearly 10% more available engine horsepower, a more efficient hydraulic system, and new engine-pump control logic allow for significantly improved multifunction performance, providing a productivity increase up to 12% when compared to the PC2000-8.

Komatsu also offers P&H electric rope shovels that provide the lowest cost-per-ton solution for high performance mining operations. Learn more about our electric rope shovels here.

  • PRODUCTIVITY, EFFICIENCY, AND MULTIFUNCTION PERFORMANCE
    • Faster cycle times and improved multifunction performance
    • Tier 4 Final emission-compliant engine with 1,046 net horsepower
    • Four selectable working modes to tailor machine performance to operating conditions
    • Power Plus (P+) mode increases productivity up to 12%
    • Redesigned hydraulic system monitors work equipment loads and optimizes hydraulic flow, based on operating conditions
    • Swing priority valve makes sure swing speed is available when needed
    • Auto deceleration, auto-low idle, and auto idle shutdown
  • RELIABILITY AND DURABILITY
    • Thicker, stronger boom plates and castings, highly resistant to bending and torsional stresses
    • Strengthened center and track frame
    • Larger diameter carrier rollers for extended service life
    • New sealing package on work equipment cylinders to withstand the most abrasive applications
    • Power module makes installation and removal of components easier, and reduces overhaul hours and cost.
  • ACCESS AND OPERATOR COMFORT
    • Operator's cab OPG level 2 (ISO 10262)
    • Hydraulically operated stairway with 45° access
    • Secondary engine stop switches located at ground level, along walkway, and in cabin
    • Fuel shut off valves located at ground level and along walkway
    • Air-suspension seat, heated, with console-mounted arm rests
    • Two automatic, large capacity air conditioning units
    • Extremely quiet, air pressurized cab, with a dynamic noise of 64.1 dB(A)
  • INFORMATION, COMMUNICATION, AND TECHNOLOGY
    • 7-inch, advanced, machine monitoring system with onboard diagnostics, no laptop required
    • KomVision, bird's-eye view, 7-camera system with dedicated 10-inch display
    • Operator ID records KOMTRAX machine operation and application data
    • KOMTRAX Plus, for immediate diagnostics of machine health and performance
    • Fleet Management via KOMTRAX Plus and/or available integration with 3rd party telematics systems
GENERAL INFORMATION
Manufacturer
Komatsu
Model Year
Model
PC2000-11
Condition
NEW
Body
Steering
Two levers with pedals
Dimensions
Length
55’10”
Width
25’6” (overall installed) 20’7” (Upper width L/R walkways walkway removed)) 1’ (width of R walkway)
Height
23’5” (to top of boom) 25’ (to top of cab)
Weight
445,179-456,926 lbs.
Ground Clearance
6’10” (counterweight) 2’8” (minimum)
Fuel Tank Capacity
898.2 US Gallons
Bucket Weight
24,000 lbs.-28,800 lbs.
Engine
Engine Make
Komatsu
Engine Model
SAA12V140E-7
Engine Type
Direct Injection
Cylinders
12
Horsepower
1046
Cooling
Water-cooled
Bore x Stroke
5.51” x 6.50”
Governor
All-speed, eletrontic
Rated RPM
1800
Aspiration
Turbocharged, aftercooled, cooled, EGR
Cycles
4
Piston Displacement
1860 in³
Drivetrain
Brakes
Parking: Oil disc brakes
Gradeability
70%, 35°
Track Length
24’5” 18’11” (on ground)
Track Rollers
8 (each side)
Ground Pressure
22.8-27.9 PSI
Carrier Rollers
3 (each side)
Track Adjuster
Grease
Hydraulic
Pump
Variable capacity piston pumps Pumps for Boom, arm, bucket, swing, and travel circuits
Std Pump Flow
612 gal/min (attachment, swing and travel) 85.6 gal/min (fan drive)
Hydraulic Tank Capacity
343.4 US Gallons
Hydraulic Flow
612 gal/min (for attachment, swing and travel) 85.6 gal/min (for fan drive)
Hydraulic Cylinders
Number of cylinders-bore x stroke Backhoe Boom: 2-11.8” x 104.2” Backhoe Arm: 2-9.8” x 84.2” Backhoe Bucket: 2-7.9” x 85.4”
Relief Valve Setting
Backhoe circuit: 4,270 psi Travel circuit: 4,760 psi Swing circuit: 4,270 psi Pilot circuit: 464 psi
Hydraulic Working Modes
3
Hydraulic Motors
Travel: 2 x axial piston motors with parking brake Swing: 2 x axial piston motor with swing holding brake
Hydraulics
Open-center load sensing system, 3 selectable working modes
Operational
Bucket Width
102”-107”
Dig Depth
30’4”
Dig Height
44’0”
Arm Length
12’10”
Dump Height
28’5”
Bucket Capacity
15.7-17.9 yd³
Travel Speed - Forward
1.7 mph
Boom Length
28’7”
Tail Swing Radius
19’7”
Swing Speed
4.8 RPM
Shoes
49 (each side)
Track Gauge
15’1”
Swing Reduction
2 x Planetary gear
Swing Circle Lubrication
Grease-bathed
Swing Lock
Oil disc brakes
Hydraulic Type
Open-center load sensing sytem
Digging Reach
51’9” 50’3” (at ground level)
Swing Gear
2 x Planetary gear

Legal Notice: Manufacturer Name, Logo and Model Information are Registered Trademarks of the Manufacturer.
Specifications and other information are subject to change without notice. No representation of accuracy is made.
Image is believed to be in the public domain or used with permission.
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.

New Equipment Sales only available in assigned territories where Kirby-Smith Machinery, Inc. is a licensed distributor. Not all manufacturer's brands available at each location. Please contact your local Kirby-Smith branch if you have questions regarding availability.
LOCATIONS
CAREERS
CONTACT