Why rent when you can own?
Call us to see if ownership makes economical sense for you and your organization.
Designed for smooth, powerful accuracy at your operator’s fingertips. A unique dual mode transmission with a torque converter and innovative stall prevention technology makes this motor grader easier to operate for operators of varying skill levels.
2D cross slope standard: Simplify road maintenance and easily maintain a desired cross slope angle when adjusting the blade cutting height. The main display and integrated control levers allow the operator to quickly select a predetermined slope angle.
Dual mode powershift transmission: Control, finesse and traction where it is needed — at the ground with our unique dual-mode transmission. Torque converter with stall prevention technology makes it easier to operators of varying skill levels.
Convenient control: The all-new, low-effort fingertip control levers provide quick response and precision, for new and experienced operators. Located on the powered armrests for ultimate comfort, arm movement is reduced up to 92%.
Designed for ease of operation: Put your operator in control. Equipped with both a right-sized steering wheel and steering lever to match operator preference and to reduce fatigue.
Fuel efficiency: Efficient operation with two selectable power settings. For fine finish grading or light-duty road maintenance, eco mode helps provide fuel efficiency, while heavy pushing or high-demand tasks are tackled in power mode.
Reliability: Protect the moldboard, drawbar and blade circle from damage with two selectable function blade accumulators. Blade lift cylinders absorb impacts if the blade edge hits an immobile object such as a manhole, boulder or railroad crossing.
Operator comfort: Long days on the job are more comfortable with the new standard air suspension seat. The seat adjusts to the operator’s weight and dampens vibrations from the machine, reducing fatigue.
Smooth, efficient operation: High-performance hydraulic system provides responsive control and smooth, constant speed. The closed center load sensing system allows for multiple circuits to operate simultaneously, independent of engine speed.
Ergonomic cab: Increase visibility to the moldboard heel and toe with the new hexagonal cab. The comfortable cab has enhanced ergonomics with adjustable seat, consoles, arm rests and controls.
|Drawbar||A-shaped, u-section press formed and welded construction for maximum strength with a replaceable drawbar ball
Frame: 8.3” x 0.87”
|Circle||Single piece rolled ring forging. Six circle support shoes with replaceable wear surface. Circle teeth hardened on front 180° of circle
Diameter (outside): 5’
Circle reversing control hydraulic rotation: 360°
|Moldboard||Hydraulic power shift fabricated from high tensile steel. Includes replaceable metal wear inserts, cutting edge and end bits. Cutting edge and end bits are hardened.
Dimensions: 14’ x 1’11” x 1”
Arc radius: 1’5”
Cutting edge: 6” x 0.63”
Replaceable/Reversible side edges: 1’6” x 6” x 0.6”
Blade pull: Base GVW-22,267 lbs.; with ripper GVW-25,045 lbs.
Blade down pressure: Base GVW-15,300 lbs.; with ripper GVW-19,31
|Frame||Front Frame Structure
Upper, Lower: 1”
|Ground Clearance||2’ (front axle at pivot)|
|Operating Weight||38,140 lbs.|
|Engine Type||4-cycle, direct injection|
P-Mode Gear 1-3: 183 HP
P-Mode Gear 4-6: 203 HP
P-Mode Gear 7-8: 221 HP
E-Mode Gear 1-6: 183 HP
E-Mode Gear 7-8: 221 HP
|Net Horsepower||Manual Mode:
P-Mode Gear 1-3: 180 HP
P-Mode Gear 4-6: 200 HP
P-Mode Gear 7-8: 218 HP
E-Mode Gear 1-6: 180 HP
E-Mode Gear 7-8: 218 HP
|Bore x Stroke||4.21” x 4.88”|
|Torque||Max: 694 ft-lbs.
|Air Cleaner||2-stage, dry-type|
|Fuel Tank Capacity||103 gallons|
|Aspiration||Turbocharged, aftercooled, cooled EGR|
|Transmission||Full power shift transmission with integral free wheeling stator torque converter and lock-up|
|Speed - Foreward||1st: 2.4 mph
2nd: 3.4 mph
3rd: 4.8 mph
4th: 7 mph
5th: 10.5 mph
6th: 15.2 mph
7th: 20.9 mph
8th: 30.1 mph
|Speed - Reverse||1st: 3.1 mph
2nd: 6.3 mph
3rd: 13.9 mph
4th: 27.6 mph
|Brakes||Service: Foot operated, sealed oil disc brakes, hydraulically actuated on four tandem wheels
Parking: Manually actuated, spring applied, hydraulically released caliper
Rims (demountable): 13” one-piece rims
|Front Axle||Solid bar construction welded steel sections|
|Rear Axle||Alloy steel, heat treated, full floating axle with lock/unlock differential|
|Wheels||Bearings: Tapered roller
16° (lean angle, right or left, on front axle)
|Pump Output||53.6 Gallons|
|System Pressure||Max: 3000 psi|
|Hydraulic Capacity||18.2 gallons|
|Type||Load-sensing closed center hydraulics with variable displacement piston pump. Electronic proportional controlled valves with preselected maximum flow setting to each function. Double acting anti-drift check valves on blade lift, tip, circle shift, articulation, and leaning wheels.|
|Standby Pressure||500 psi|
|Steering||Hydraulic power steering providing stopped engine steering meeting ISO 5010
Steering range, right or left: 49°
|Articulation||Right or Left: 25°|
Shank holders: 5
Shank holder spacing: 1’9”
Penetration force: 21,275 lbs.
Pryout Force: 36,597 lbs.
Machine length increase, beam raised: 2’5”
|Scarifiers||Working width: 4’8” (Middle, V-type); 7’2” (Rear)
Max Depth: 7.5” (Middle, V-type); 6.5” (Rear)
Shank Holders: 11 (Middle, V-type); 9 (Rear)
Shank Holders Spacing: 5’4” (Middle, V-type); 10.5” (Rear)
|Oscillation Angle||Tandem: 11° forward; 13° reverse
Front axle: 32°
|Blade Range||Moldboard side shift: 2’1”
Max Shoulder reach outside rear tires (frame straight): 8’2” (right), 8’6” (left)
Max. lift above ground: 1’7”
Max. cutting depth: 2’
Max. blade angle, right or left: 90°
Blade tip angle: 40° forward, 5° backward
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.