Want to rent it?
Do you want to know if renting makes more economical sense?
Call us and find out today.
Komatsu D65PX-18 WH Bulldozer The toughest waste conditions require the best equipment. Designed with field experience and customer feedback, our dozer waste solutions offer ample pushing power and special filters and guards that provide protection from environmental debris.
Auto reversing fan: Minimize overheating from airborne debris with a fan that auto reverses based on adjustable interval and duration. Engine pre-cleaner: Keep your engine clear with a pre-cleaner that blocks and removes large particles from the air before they reach the engine air filter. Extra guards throughout: Help protect your machine from damage and contamination due to debris with extra guards added to final drive seals, tanks and engine. Track shoe holes: Reduces track compacting by allowing debris to be pushed through the track shoe holes. Re-located A/C condenser: Increase cooling efficiency with a re-located A/C condenser that’s mounted to the roof to protect it from debris. Trash rack: Your operator needs a wide range of vision while moving piles of waste. The trash rack was designed for optimal operator visibility with increased blade capacity. Front and rear striker bars: Reduce debris from riding up on the tracks and damaging the chassis with front and rear striker bars. |
Dimensions | |
---|---|
Length | 19’7” (Straight Tilt Dozer) 19’11” (PAT Dozer) |
Width | 6’9” (Straight Tilt Dozer) 7’4” (PAT Dozer) |
Height | 10’5” |
Weight | 44,000 lbs. |
Ground Clearance | 1’4” |
Turning Radius | 7’3” |
Operating Weight | 53,136 lbs. 56,337 lbs. (PAT Dozer) |
Fuel Tank Capacity | 109.6 US gallons |
Frame Type | Track roller frame: Monocoque, large section, durable construction |
Final Drive | Double-reduction final drive of spur and planetary gear sets to increase tractive effort and reduce gear tooth stresses for long final drive life. Segmented sprocket teeth are bolt-on for easy replacement. |
Engine | |
---|---|
Engine Make | Komatsu |
Engine Model | SAA6D114E-6 |
Engine Type | 4-cycle, Direct injection |
Cylinders | 6 |
Net Horsepower | 217 HP |
Cooling | Water-cooled |
Bore x Stroke | 4.49” x 5.69” |
Speed - Foreward | 1st: 2.3 MPH 2nd: 3.5 MPH 3rd L: 4.5 MPH 3rd: 7 MPH |
Speed - Reverse | 1st: 2.8 MPH 2nd: 4.2 MPH 3rd L: 5.4 MPH 3rd: 8.5 MPH |
Gross Horsepower | 220 HP |
Governor | All-speed and mid-range, electronic |
Rated RPM | 1950 rpm |
Lubrication System | Method: Gear pump, force lubrication Filter: Full-flow |
Aspiration | Variable geometry turbocharged, air-to-air aftercooled |
Piston Displacement | 540 in³ |
Fan Drive Type | Hydraulic |
Drivetrain | |
---|---|
Transmission | Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 2-phase, torque converter with lockup clutch, and a planetary gear, multiple-disc clutch transmission, which is electronically controlled, hydraulically actuated and force-lubricated for optimum heat dissipation. Shift lock lever and neutral safety switch. |
Track Length | 10’9” |
Track Rollers | 8 per side |
Roller Type | Lubricated |
Ground Pressure | 4.69 PSI (outside mounted blade) 5.69 PSI (inside mounted blade) |
Grouser Height | 2.6” |
Hydraulic | |
---|---|
Control Valve | Spool control valves for SIGMADOZER or straight tilt dozer Positions: Blade lift—Raise, hold, lower, and float Blade tilt—Right, hold, and left Rear attachment—Raise, hold, and lower Spool control valves for Power Angle Tilt dozer Positions: Blade lift—Raise, hold, lower, and float Blade tilt—Right, hold, and left Blade angle—Right, hold, and left Rear attachment—Raise, hold, and lower |
Hydraulic System | Closed-center load sensing system (CLSS) designed for precise and responsive control, and for efficient simultaneous operation |
Hydraulic Cylinders | SIGMADOZER Straight Tilt Dozer (Number of cylinders x Bore) Blade lift: 2 x 3.3” Blade tilt: 1 x 4.9” Blade angle: 2 x NA Ripper lift: 1 x 4.9” Pitch angle: 39°-53° Power Angle Power Tilt Dozer (Number of cylinders x Bore) Blade lift: 2 x 3.5” Blade tilt: 1 x 5.1” Blade angle: 2 x 4.3” Ripper lift: 1 x 4.9” Pitch angle: 52°-58° |
Relief Valve Setting | 4,050 psi |
Operational | |
---|---|
Blade Width | 13’ (Straight Tilt Dozer) 13’2” (Power Angle Tilt Dozer) |
Blade Height | 5’11” (Straight Tilt Dozer) 6’4” (Power Angle Tilt Dozer) |
Blade Capacity | 12.9 yd³ (Straight tilt Dozer) 15.1 yd³ (Power Angle Tilt Dozer) |
Suspension | Oscillating equalizer bar and pivot shaft |
Steering | Palm Command Control System (PCCS) lever controls for all directional movements. Pushing the PCCS lever forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the PCCS lever to left to make a left turn. Tilt it to the right for a right turn. Hydrostatic Steering System (HSS) is powered by steering planetary units and a hydraulic pump and motor. Counterrotation turns are also available. Wet, multiple-disc, pedal controlled service brakes are spring-actuated and hydraulically released. Gear shift lock lever also applies parking brake. |
Shoes | 45 each side Track Shoes: Parallel Link Undercarriage System (PLUS) with lubricated rotating bushings for extended system wear life and lower maintenance costs. Track tension is easily adjusted with a grease gun. |
Shoe Width | 30” (inside mounted blade) 36” (outside mounted blade) |
Shoe Type | Single grouser |
Ground Contact | 7,716 in² (inside mounted blade) 9,290 in² (outside mounted blade) |
Standard Waste Handler Package Equipment
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
New Equipment Sales only available in assigned territories where Kirby-Smith Machinery, Inc. is a licensed distributor. Not all manufacturer's brands available at each location. Please contact your local Kirby-Smith branch if you have questions regarding availability.
Main Technical Specifications | |
---|---|
MAKE | Komatsu |
MODEL | D65PX-18 WH |
Do you want to know if renting makes more economical sense?
Call us and find out today.