Want to rent it?
Do you want to know if renting makes more economical sense?
Call us and find out today.
|
New Komatsu D175AX-10 Dozer for Sale The D175AX-10 is a completely redesigned new generation of production dozer engineered to help you achieve two key measurable business goals — move more material with greater control and lower your total cost of ownership.
*All percentage claims are based on a comparison to the previous D155AX-8 model. Features and benefits
|
| Body | |
|---|---|
| Undercarriage | Komatsu Bogie (K-Bogie)-Lubricated track rollers are resiliently mounted to the track frame with a bogie suspension system whose oscillating motion is cushioned by rubber pads |
| Number of Carrier Rollers | 2 (each side) |
| Number of Shoes | 43 (each side) |
| Number of Track Rollers | 8 (each side) |
| Track Frame | Monocoque, high-tensile-strength steel construction |
| Dimensions | |
|---|---|
| Length | 28'3" |
| Width | 13'6.6" |
| Height | 11'5.2" |
| Weight | 100,310 lbs. |
| Ground Clearance | 1’8.25” |
| Turning Radius | 3’6” |
| Fuel Tank Capacity | 165.1 Gallons |
| Final Drive | Double-reduction, spur and planetary final drives increase tractive effort. Segmented sprockets are bolt-on for easy in-the-field replacement |
| Engine | |
|---|---|
| Engine Make | Komatsu |
| Engine Model | DBA127 |
| Horsepower | 450 HP |
| Cooling | Water-cooled |
| Bore x Stroke | 5.1” x 6.3” |
| Rated RPM | 1900 RPM |
| Lubrication System | Filter: Full-flow Method: Gear pump, force lubrication |
| Aspiration | Turbocharged, aftercooled |
| Cycles | 4-cycle |
| Piston Displacement | 777 in³ |
| Fan Drive Type | Hydraulic |
| Engine Oil Capacity | 12.9 Gallons |
| DEF Tank Capacity | 20.1 Gallons |
| Coolant Capacity | 25.1 Gallons |
| Transmission Capacity | 23.8 Gallons (Bevel gear and steering system) |
| Final Drive Capacity | 8.2 Gallons |
| Damper Case Capacity | 0.4 Gallons |
| Drivetrain | |
|---|---|
| Ground Pressure | 82.8 kPa (tractor only, including ROPS cab) |
| Grouser Height | 3.1” |
| Torqflow Transmission | Reverse: 1st: 3 mph, 2nd: 5.5 mph, 3rd: 9.2 mph Forward: 1st: 2.3 mph, 2nd: 4.2 mph, 3rd: 7.1 mph |
| Hydraulic | |
|---|---|
| Hydraulic System | Closed-center load sensing system (CLSS) designed for precise and responsive control, and efficient simultaneous operation |
| Hydraulic Cylinders | Double-acting, piston Blade lift: Number of Cylinders-2; Bore-4.3” Blade tilt: Number of Cylinders-1; Bore-6.3” Ripper lift: Number of Cylinders-1; Bore-7.1” Ripper tilt: Number of Cylinders-1; Bore-7.9” |
| Number of Cylinders | 6 |
| Relief Valve Setting | Implement: 4,134 PSI Steering: 5,729 PSI |
| Hydraulic Control Unit | All spool control valves externally mounted beside the hydraulic tank. Variable piston pump with capacity (discharge flow) of 345 L/min for steering and 225 L/min for implement at rated engine rpm |
| Hydraulic Positions | Blade Lift: Raise, hold, lower, and float Blade Tilt: Right, hold, and left Ripper Lift: Raise, hold, and lower Ripper Tilt: Increase, hold, and decrease |
| Operational | |
|---|---|
| Blade Capacity | 13.9-16.9 yd³ |
| Suspension | Oscillation-type with equalizer bar and forward mounted pivot shafts |
| Steering | HSS is powered by steering planetary units and an independent hydraulic pump and motor. Counter-rotation turns are also available. Wet, multiple-disc, pedal-controlled service brakes are spring-actuated and hydraulically released. |
| Drawbar Pull | Maximum usable pull depends on traction and mass of tractor including mounted equipment |
| Shoes | 28” single grouser shoes; additional mass-970 lbs.; ground contact area-7,459 in² 24” extreme grouser shoes; additional mass-1,014 lbs.; ground contact area-6,408.6 in² 26” extreme grouser shoes; additional mass-1,587 lbs.; ground contact area-6,934 in² |
| Shoe Width | 24”/28” |
| Ground Contact | 44.50 ft² |
| Track Shoes | Lubricated tracks. Unique dues seals for preventing entry of foreign abrasives into pin-to-bushing clearance for extended service. Track tension easily adjusted with grease gun |
Engine and Related Components
Hydraulic System
Powertrain
Undercarriage
Lighting
Service and Maintenance
Cab
Safety
Other
Undercarriage
Work Equipment
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
New Equipment Sales only available in assigned territories where Kirby-Smith Machinery, Inc. is a licensed distributor. Not all manufacturer's brands available at each location. Please contact your local Kirby-Smith branch if you have questions regarding availability.
| Main Technical Specifications | |
|---|---|
| MAKE | Komatsu |
| MODEL | D175AX-10 |
Do you want to know if renting makes more economical sense?
Call us and find out today.