Want to rent it?
Do you want to know if renting makes more economical sense?
Call us and find out today.
|
Hitachi ZW80 Loader Offering exceptional levels of performance without compromising on efficiency, Hitachi ZW-5b wheel loaders are designed to satisfy the requirements of the North American construction industry. Designed to be reliable, durable and versatile for a variety of job sites, and to operate with low levels of fuel consumption, they incorporate the high quality engineering for which Hitachi is renowned. RELIABILITY
VERSATILITY
QUALITY
TECHNOLOGY
|
| Dimensions | |
|---|---|
| Length | 17’8” |
| Width | 6’4” |
| Height | 9’6” |
| Weight | 12,600 lbs. |
| Wheelbase | 7’3” |
| Ground Clearance | 13’ |
| Turning Radius | 10’3” |
| Steering Angle | Each direction 40°; total 80° |
| Engine | |
|---|---|
| Engine Make | Deutz |
| Engine Model | TD2.9L4 |
| Engine Type | Diesel engine, direct injection w/turbocharger and air cooled intercooler |
| Gross Horsepower | 66 HP |
| Net Horsepower | 63 HP |
| Cooling | Water-cooled Module type: Forced circulation type |
| Bore x Stroke | 3.4” x 4.3” |
| Displacement | 179 in³ |
| Gears | Reduction & differential: Differential lock (front axle only) Final Reduction: Inboard mounted, heavy duty planetary gear |
| Air Cleaner | Dry type (double element) with restriction indicator |
| Fuel Type | #2 Diesel (Requires ultra-low sulfur fuel) |
| Fuel Tank Capacity | 21.7 Gallons |
| Starter | DC 12V-4.4 HP |
| Battery | 12V-680 CCA, 2 units |
| Alternator | AC 14V-95A |
| Governor | All speed electrical type |
| Rated RPM | 2200 RPM |
| Cycles | 4 |
| Drivetrain | |
|---|---|
| Axles | Semi-floating type, fixed to the front frame, center pivot |
| Transmission Type | Hydrostatic transmission (HST) automatically controls power and 2-speed |
| Drive System | Four-wheel drive system |
| Brakes | Service: Inboard mounted fully hydraulic wet disc brakes Parking/Emergency: Spring-applied, hydraulically-released wet disc |
| Tires | 17.5-65-20 10PR (L-2) |
| Transmission Control Method | Hydrostatic transmission (HST) automatically controls power and 2-speed |
| Hydraulic | |
|---|---|
| Pump | Electronically controlled, common rail type (Fuel Injection Pump) |
| Hydraulic Tank Capacity | 19.3 Gallons |
| Hydraulic System | Arm and bucket are controlled by mechanical single control lever Arm controls: Four position valve; Raise, hold, lower, float Bucket controls: Four position valve; Dump, hold, tilt, detent |
| Hydraulic Cylinders | Lift (Boom): Two (2) double-acting piston type: 3.2” x 21.7” Tilt (Bucket): Two (2) double-acting piston type: 3.1” x 18” Steering: Two (2) double-acting piston type: 1.8” x 13.4” |
| Number of Cylinders | 4 |
| Bucket | Standard arm with quick-coupler General purpose with bolt-on cutting edges |
| Hydraulic Cycle Time | Front end loading, Z bar linkage system Lifting time (at full load): 5.0 seconds Lowering time (empty): 3.0 seconds Bucket dumping time: 1.0 seconds Total: 9.5 seconds |
| Hydraulic Pressure | 20.6 MPa |
| Relief Valve Setting | 2,987 PSI |
| Hydraulic Pump | Main oil: 1000 PSI HST Charging: 3260 PSI |
| Hydraulic Filter | Full-flow 10 micron return filter |
| Operational | |
|---|---|
| Bucket Width | 6.5’ |
| Dig Depth | 3” |
| Tipping Load | Straight: 8,470 lbs. Full Turn: 7,170 lbs. |
| Bucket Capacity | 1.2 yd³ (heaped) 1.0 yd³ (struck) |
| Height to Bucket Pin | 10’5” (fully raised) |
| Dump Reach | 3’3” |
| Steering | Articulated frame steering Mechanism: Double-acting piston type |
| Travel Speed - Forward | 5.0-10.6 MPH |
| Travel Speed - Reverse | 7.5-21.1 MPH |
| Rollback @ Ground | 53° |
| Max. Reach | 3.2’ |
| Breakout Force | 8,270 lbs. |
| Oscillation | Angle: Total 22 (+11,-11)° |
| Rollback Angle | 49 deg |
| Dump Clearance | 7’10” |
| Hinge Pin Height | 10’5” |
| Clearance Circle | 12’5” (at outside bucket) |
| Bucket Tilt | 41 deg (at ground position) |
| Static Tipping Load | 8,470 lbs. |
ENGINE
POWERTRAIN
HYDRAULIC SYSTEM
ELECTRICAL
CAB
OTHERS
ALARMS, GAUGES, INDICATORS
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
New Equipment Sales only available in assigned territories where Kirby-Smith Machinery, Inc. is a licensed distributor. Not all manufacturer's brands available at each location. Please contact your local Kirby-Smith branch if you have questions regarding availability.
| Main Technical Specifications | |
|---|---|
| MAKE | Hitachi |
| MODEL | ZW80 |
Do you want to know if renting makes more economical sense?
Call us and find out today.
