Want to rent it?
Do you want to know if renting makes more economical sense?
Call us and find out today.
Hitachi ZW150PL-6 Loader
Offering exceptional levels of performance without compromising on efficiency, Hitachi ZW-6 wheel loaders are designed to satisfy the requirements of the North American construction industry.
Designed to be reliable, durable and versatile for a variety of job sites, and to operate with low levels of fuel consumption, they incorporate the high quality engineering for which Hitachi is renowned.
RELIABILITY
VERSATILITY
QUALITY
TECHNOLOGY
| Dimensions | |
|---|---|
| Length | 25’5” |
| Width | 8.2’ |
| Height | 10’9” |
| Weight | 27,010 lbs. |
| Wheelbase | 9’11” |
| Ground Clearance | 17” |
| Turning Radius | 16.7’ |
| Steering Angle | Each direction 40°, total 80° |
| Engine | |
|---|---|
| Engine Make | Cummins |
| Engine Model | QSB4.5 |
| Engine Type | Diesel engine, direct injection w/turbocharger and air cooled intercooler |
| Gross Horsepower | 145 HP |
| Net Horsepower | 142 HP |
| Cooling | Water-cooled Module type: Forced circulation type |
| Bore x Stroke | 4.2” x 4.9” |
| Displacement | 272 in³ |
| Speed - Foreward | 1st-4.3 mph 2nd-8.0 mph 3rd-12.42 mph 4th-24.2 mph |
| Speed - Reverse | 1st-4.3 mph 2nd-8.0 mph 3rd-12.42 mph 4th-24.2 mph |
| Gears | Reduction & differential: Two-stage reduction with limited slip differential Final Reduction: Inboard mounted, heavy duty planetary gear |
| Air Cleaner | Dry type (double element) with restriction indicator |
| Fuel Type | #2 Diesel (Requires ultra-low sulfur fuel) |
| Fuel Tank Capacity | 52.8 Gallons |
| Starter | DC 24V-6.1 HP |
| Battery | 12V-930 CCA |
| Alternator | DC 24V-65A |
| Governor | All speed electrical type |
| Rated RPM | 2200 RPM |
| Aspiration | Turbocharger and intercooled |
| Cycles | 4 |
| Drivetrain | |
|---|---|
| Axles | Semi-floating type |
| Transmission Type | Electrical-controlled 2 motor hydrostatic transmission with summation gear box; Gear box: Fixed gear ratio, powershift countershaft type |
| Torque | 597 Nm at 1500 |
| Drive System | Four-wheel drive system |
| Brakes | Service: Inboard mounted fully hydraulic 4-wheel disc brake. Front and rear independent brake circuit Parking/Emergency: Transmission mounted, spring-applied, hydraulically-released multi wet disc |
| Tires | 20.5 R25 (L-3) |
| Hydraulic | |
|---|---|
| Pump | Electronically controlled, common rail type (Fuel Injection Pump) |
| Hydraulic Cylinders | Lift (Boom): Two (2) double-acting piston type: 4.9” x 29.9” Tilt (Bucket): Two (2) double-acting piston type: 4.3” x 39.6” Steering: Two (2) double-acting piston type: 2.6” x 16.5” |
| Number of Cylinders | 4 |
| Hydraulic Cycle Time | Front end loading, Z bar linkage system Lifting time (at full load): 6.0 seconds Lowering time (empty): 3.4 seconds Bucket dumping time: 3.4 seconds Total: 12.8 seconds |
| Relief Valve Setting | 2988 PSI (Control) 2843 PSI (Priority) |
| Hydraulic Pump | Main oil: 2988 PSI HST Charging: 355 PSI |
| Operational | |
|---|---|
| Dig Depth | 4” |
| Tipping Load | Bolt-on Cutting Edge: Straight-19,820 lbs.; Full 40 Degree Turn-17,110 lbs. Weld-on Adaptor & Teeth: Straight-19,910 lbs.; Full 40 Degree Turn-17,200 lbs. |
| Bucket Capacity | 2.8 yd³ (heaped) 2.4 yd³ (struck) |
| Height to Bucket Pin | 13.1’ |
| Dump Reach | 3’3”-3’11” |
| Steering | Articulated frame steering Mechanism: Hydraulic power steering unit, double-acting piston type |
| Travel Speed - Forward | 1st: 4.3 MPH 2nd: 7.2 MPH (Normal Mode); 7.8 MPH (Power Mode) 3rd: 12.4 MPH 4th: 24.2 MPH |
| Travel Speed - Reverse | 1st: 4.3 MPH 2nd: 7.2 MPH (Normal Mode); 7.8 MPH (Power Mode) 3rd: 12.4 MPH 4th: 24.2 MPH |
| Max. Reach | Bolt-on cutting edge: 4.1’ (45° dump, full height) Weld-on Adaptor & Teeth: 4.5’ (45° dump, full height) |
| Breakout Force | 24,054 lb (Standard Arm) 23,380 lb (High Lift Arm) |
| Oscillation | Angle: Total 20 (+10,-10)° |
| Rollback Angle | 50 deg (Max at carry position) 55 deg (Standard Arm)/50 deg (High Lift Arm) (at full height) |
| Dump Clearance | 9’2” |
| Hinge Pin Height | 13’ |
| Clearance Circle | 19’9” (outside of bucket) 16’8” (outside of tire) |
| Bucket Tilt | 43-44 deg (at ground position) |
| Static Tipping Load | 20,260 lbs. (Standard Arm) 16,230 lbs. (High Lift Arm) |
ENGINE
POWERTRAIN
HYDRAULIC SYSTEM
ELECTRICAL
CAB
OTHERS
ALARMS, GAUGES, INDICATORS
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
New Equipment Sales only available in assigned territories where Kirby-Smith Machinery, Inc. is a licensed distributor. Not all manufacturer's brands available at each location. Please contact your local Kirby-Smith branch if you have questions regarding availability.
| Main Technical Specifications | |
|---|---|
| MAKE | Hitachi |
| MODEL | ZW150PL-6 |
Do you want to know if renting makes more economical sense?
Call us and find out today.
