Hitachi ZW150-6

New Hitachi Loader for Sale

Offering exceptional levels of performance without compromising on efficiency, Hitachi ZW-6 wheel loaders are designed to satisfy the requirements of the North American construction industry. Designed to be reliable, durable and versatile for a variety of job sites, and to operate with low levels of fuel consumption, they incorporate the highquality engineering for which Hitachi is renowned.

Renowned for reliability, Hitachi ZW-6 wheel loaders achieve exceptional levels of performance and efficiency with minimum downtime. The ZW150-6 have been designed with several user-friendly features that ensure quick and easy maintenance, and also contribute to lower running costs.

Dimensions
Length Standard Arm: 24.7’
High Lift Arm: 26.0’
Width 8.2’
Height 10.7’
Weight Standard Arm: 27,010 lbs.
High Lift Arm: 28,890 lbs.
Wheelbase 9.8’
Ground Clearance 16.9”
Turning Radius Standard Arm: 19.5’
High Lift Arm: 17.6’
Steering Angle Each direction 40°, total 80°
Engine
Engine Make Cummins
Engine Model QSB4.5
Engine Type 4-cycle water-cooled, direct injection
Cylinders 4
Gross Horsepower 141 HP
Net Horsepower 140 HP
Bore x Stroke Engine: 4.2” x 4.9”
Steering: 2 x 2.6” x 16.5”
Speed - Foreward 1st-4.3 mph
2nd-8.0 mph
3rd-12.42 mph
4th-24.2 mph
Speed - Reverse 1st-4.3 mph
2nd-8.0 mph
3rd-12.42 mph
4th-24.2 mph
Gears Reduction & Differential Gear: Two stage reduction with limited slip differential
Air Cleaner Two element dry type with restriction indicator
Fuel Tank Capacity 50.2 gallons
Battery 2 x 12 V
Aspiration Turbocharger and intercooled
Drivetrain
Axles Semi-floating (Front & Rear Axle); Front-Fixed to the front frame and Rear-Trunnion support
Transmission Type Electrical-controlled 2 motor hydrostatic transmission with gear box, Gear box: Fixed gear ratio, powershift countershaft type
Torque 597 Nm at 1500
Drive System Four-wheel drive system
Brakes Service: Inboard mounted fully hydraulic 4 wheel wet disc brakes. Front & rear independent brake circuit, HST (Hydro Static Transmission) system provides additional hydraulic braking capacity
Parking: Spring applied, hydraulically released, wet disc type
Hydraulic
Pump Load & Steer; Gear type 51.2 gal/min
Relief pressure setting-20.6 MPa
HST charging pump-Gear type 14.2 gal/m
Hydraulic Cylinders Double acting type
No. x Bore x Stroke
Arm: 2 x 4.9” 29.9”
Bucket: 1 x 5.9” x 19.5”
Hydraulic Cycle Time Lift arm raise-6.0 s
Lift arm lower-4.5 s
Bucket dump-1.4 s
Total-11.9 s
Operational
Tipping Load Standard Arm: 23,020 lbs.
High Lift Arm: 18,250 lbs.
Height to Bucket Pin Standard Arm: 12.6’ (fully raised)
High Lift Arm: 13.8’ (fully raised)
Steering Articulated frame steering
Cylinders-Double-acting piston type
Max. Reach Standard Arm: 3.4’ (45° dump, full height)
High Lift Arm: 4.0’ (45° dump, full height)
Breakout Force Standard Arm: 22,031 lbf
High Lift Arm: 21,356 lbf
Rollback Angle Standard Arm: Carry Position 50°, Full height-57°
High Lift Arm: Carry Position 50°, Full height-52°

 

ENGINE

  • Air cleaner, double element
  • Auto idle shut down
  • Cold start (glow plug)
  • Cooling fan, automatic reversible
  • Cummins QSB4.5 diesel engine
  • EGR system
  • Fuel filter (main), w/water separator
  • Fuel pre-filter, w/water separator
  • SCR catalyst and DOC
  • VGT (Variable Geometry Turbocharger)
  • Work mode selector


POWERTRAIN

  • Brakes, service
  • Enclosed wet disc
  • Dual system
  • Inboard mounted
  • Brake, parking
  • Spring applied
  • Oil pressure released
  • Wet disc type
  • Cooling system cores, wide-fin
  • Differential, limited slip (F/R)
  • Drive shafts, low maintenance
  • F-R direction selector (2-column mounted/HYD-control
  • lever mounted)
  • Hydrostatic transmission
  • Inching pedal
  • Maximum speed adjuster for 1st speed
  • Traction control
  • Universal joints, sealed


HYDRAULIC SYSTEM

  • Boom kick-out, dual (operator adjustable in cab)
  • Bucket positioner
  • Quick coupler control lines and controls
  • Control Lever, single, pilot-assisted w/1 aux Lever for
  • 3rd spool control
  • Control lever lock (electric)
  • Control valve, 3-spool, parallel control
  • Pump, gear, fixed displacement
  • Quick coupler control lines and controls
  • Ride control w/load sensing valve and automatic shut-off
  • Steering, orbitrol


ELECTRICAL

  • 24-volt electrical system
  • Back-up alarm
  • Batteries (2), 12V, 565 CCA
  • Battery disconnect switch
  • Converter, 12V/15 Amp
  • Horn, dual electric
  • Instrument panel, LCD, monochrome
  • Lights:
  • 2 Headlights (halogen)
  • 2 Forward working lights (halogen)
  • 4 Rear working lights (halogen)
  • 2 Stop/tail/backup (LED)
  • Turn signal w/4-way flashers/marker


CAB

  • ROPS cab: Enclosed cab with sound suppression,
  • front & rear wipers and washers, two rear view and side
  • mirrors, tinted glass, full view latch-back doors, sliding
  • side windows.
  • Accessory outlet, 12V,
  • Adjustable armrest/console, (fore/aft sliding)
  • Air conditioner/heater/pressurizer
  • AM/FM/WB radio with AUX input
  • Ashtray
  • Cab dome lamps (2)
  • Cigarette lighter
  • Coat hook
  • Cooler box storage area
  • Cup holder (2)
  • Floormat
  • Retractable seat belt (3 inch)
  • ROPS/FOPS certified
  • Seat, air suspension, fabric
  • Steering column, telescoping and tilting
  • w/quick-release pedal
  • Storage box (heated/cooled)
  • Sun visor


OTHERS

  • Articulation locking bar
  • Counterweight
  • Drawbar
  • Fenders, front, w/mudflap
  • Fenders, rear, deck-type, w/mudflap
  • Global e-Service, telematic monitoring system (GSMversion w/4 yrs. service)
  • Ladders, inclined
  • Lifting eyes
  • Linkage pins, HN bushing
  • Neutral safety start
  • Rear grill, steel
  • Steps, rear
  • Vandalism protection
  • Z-bar loader linkage


ALARMS, GAUGES, INDICATORS

  • Alarms
  • (visual &
  • audible)
  • Brake oil low pressure
  • Engine oil low pressure
  • Hydraulic oil level
  • Overheat (engine coolant)
  • Steering oil low pressure
  • Gauges DEF/AdBlue® Level
  • Engine coolant temperature
  • Fuel gauge
  • HST oil temperature
  • Indicators Aftertreatment Device
  • Air cleaner element
  • Air conditioner display
  • Battery discharge warning
  • Cold start
  • Control lever lock
  • Eco-operating status
  • Emergency steering
  • Engine warning
  • Fan reverse rotation
  • F-N-R selection
  • F-N-R switch enable
  • Fuel filter (plugged filter)
  • Fuel filter (water in fuel)
  • High beam
  • HST oil temperature
  • HST warning
  • Maintenance
  • Operating mode (Normal, Power)
  • Parking brake
  • Ride control
  • Service
  • Speedometer
  • Time/operating hour/ODO
  • Traction control switch
  • Turn signal w/4-way flashers/marker
  • Work light
  • Belly guard, front chassis, transmission (rear)
  • Bolt-on cutting edge & segments
  • Bucket teeth
  • Camera, rear view
  • Dual lever hydraulic control
  • Fenders, rear, full, w/mudflap
  • HID work lights
  • High lift boom arm
  • LED work lights
  • Pre-cleaner (turbine type)
  • Quick coupler & attachments
  • Quick coupler, ISO

*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.

*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.

New Equipment Sales only available in assigned territories where Kirby-Smith Machinery, Inc. is a licensed distributor. Not all manufacturer's brands available at each location. Please contact your local Kirby-Smith branch if you have questions regarding availability.

View Brochure

Main Technical Specifications
MAKE Hitachi
MODEL ZW150-6

Want to rent it?

Do you want to know if renting makes more economical sense?
Call us and find out today.

Hitachi ZW150-6

print
6715 W. Reno
Oklahoma City, OK 73127 Phone: 888.861.0219
www.kirby-smith.com
CUSTOMER
DATE
PRICE
SALESPERSON

Offering exceptional levels of performance without compromising on efficiency, Hitachi ZW-6 wheel loaders are designed to satisfy the requirements of the North American construction industry. Designed to be reliable, durable and versatile for a variety of job sites, and to operate with low levels of fuel consumption, they incorporate the highquality engineering for which Hitachi is renowned.

Renowned for reliability, Hitachi ZW-6 wheel loaders achieve exceptional levels of performance and efficiency with minimum downtime. The ZW150-6 have been designed with several user-friendly features that ensure quick and easy maintenance, and also contribute to lower running costs.
GENERAL INFORMATION
Manufacturer
Hitachi
Model Year
Model
ZW150-6
Condition
NEW
Dimensions
Length
Standard Arm: 24.7’ High Lift Arm: 26.0’
Width
8.2’
Height
10.7’
Weight
Standard Arm: 27,010 lbs. High Lift Arm: 28,890 lbs.
Wheelbase
9.8’
Ground Clearance
16.9”
Turning Radius
Standard Arm: 19.5’ High Lift Arm: 17.6’
Steering Angle
Each direction 40°, total 80°
Engine
Engine Make
Cummins
Engine Model
QSB4.5
Engine Type
4-cycle water-cooled, direct injection
Cylinders
4
Gross Horsepower
141 HP
Net Horsepower
140 HP
Bore x Stroke
Engine: 4.2” x 4.9” Steering: 2 x 2.6” x 16.5”
Speed - Foreward
1st-4.3 mph 2nd-8.0 mph 3rd-12.42 mph 4th-24.2 mph
Speed - Reverse
1st-4.3 mph 2nd-8.0 mph 3rd-12.42 mph 4th-24.2 mph
Gears
Reduction & Differential Gear: Two stage reduction with limited slip differential
Air Cleaner
Two element dry type with restriction indicator
Fuel Tank Capacity
50.2 gallons
Battery
2 x 12 V
Aspiration
Turbocharger and intercooled
Drivetrain
Axles
Semi-floating (Front & Rear Axle); Front-Fixed to the front frame and Rear-Trunnion support
Transmission Type
Electrical-controlled 2 motor hydrostatic transmission with gear box, Gear box: Fixed gear ratio, powershift countershaft type
Torque
597 Nm at 1500
Drive System
Four-wheel drive system
Brakes
Service: Inboard mounted fully hydraulic 4 wheel wet disc brakes. Front & rear independent brake circuit, HST (Hydro Static Transmission) system provides additional hydraulic braking capacity Parking: Spring applied, hydraulically released, wet disc type
Hydraulic
Pump
Load & Steer; Gear type 51.2 gal/min Relief pressure setting-20.6 MPa HST charging pump-Gear type 14.2 gal/m
Hydraulic Cylinders
Double acting type No. x Bore x Stroke Arm: 2 x 4.9” 29.9” Bucket: 1 x 5.9” x 19.5”
Hydraulic Cycle Time
Lift arm raise-6.0 s Lift arm lower-4.5 s Bucket dump-1.4 s Total-11.9 s
Operational
Tipping Load
Standard Arm: 23,020 lbs. High Lift Arm: 18,250 lbs.
Height to Bucket Pin
Standard Arm: 12.6’ (fully raised) High Lift Arm: 13.8’ (fully raised)
Steering
Articulated frame steering Cylinders-Double-acting piston type
Max. Reach
Standard Arm: 3.4’ (45° dump, full height) High Lift Arm: 4.0’ (45° dump, full height)
Breakout Force
Standard Arm: 22,031 lbf High Lift Arm: 21,356 lbf
Rollback Angle
Standard Arm: Carry Position 50°, Full height-57° High Lift Arm: Carry Position 50°, Full height-52°

Legal Notice: Manufacturer Name, Logo and Model Information are Registered Trademarks of the Manufacturer.
Specifications and other information are subject to change without notice. No representation of accuracy is made.
Image is believed to be in the public domain or used with permission.
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.

New Equipment Sales only available in assigned territories where Kirby-Smith Machinery, Inc. is a licensed distributor. Not all manufacturer's brands available at each location. Please contact your local Kirby-Smith branch if you have questions regarding availability.
LOCATIONS
CAREERS
CONTACT