Compact front loader in the 1-meter-class with outstanding productivity and a sophisticated vision concept. The milling drum unit comes with useful automatic features and operation of the machine is easy and intuitive. Any potential for wear and tear is reduced to a minimum while precise milling results are guaranteed.
| Wheels |
front and rear 2.2' x 1' |
| Length |
4' |
| Width |
1' |
| Height |
2' |
| Weight |
Operating-42,682 lbs |
| Engine Make |
Cummins |
| Engine Type |
QSL 9 |
| Cylinders |
6 |
| Horsepower |
345 HP |
| Cooling |
Water |
| Displacement |
2.4 gal |
| Fuel Consumption |
Rated Power: 18 gal
Field Mix: 7 gal |
| Fuel Tank Capacity |
161 gal |
| Water Tank Capacity |
423 gal |
| Emission Standards |
EU Stage 4 / US Tier 4f |
| Tracks |
Crawler tracks-4 |
| Drive |
Milling Drive-Mechanical
Travel Drive-Hydraulic/All-Track |
| Speeds |
Max. milling speed 3 mph
Max. travel speed in wheeled design 5 mph
Max. travel speed in tracked design 5 mph |
| Hydraulic Tank Capacity |
Oil-34 gal |
| Cutting Width |
51" |
| Cutting Depth |
0-13" |
| Conveyor Belt Width |
Primary conveyor: 2.1'
Discharge conveyor: 2' |
| Drum Diameter |
With tools-39" |
| Tool |
On-board tools: 66 lbs
Weight of 5 cutting tool containers: 276 lbs |
- Base Machine
- Basic machine with engine
- Mechanically opening engine cover with noise insulation
- Radiator with temperature-dependent fan speed
- Highly effective noise insulation throughout the engine compartment
- Automatic engine speed control depending on driving situation
- Elastically mounted engine station with low vibration and low noise
- Exhaust post-treatment diesel oxidation catalyst DOC (replaceable with optional equipment)
- Milling Drum Unit
- The right side of the milling drum housing can easily be folded down for maintenance or milling drum change
- Hydraulically operated scraper with mechanical locking
- Milling drum housing FB1300
- Milling Drums
- Milling drum FB1300 HT22 LA15 with 121 picks
- Milled-Out Material Loading
- Discharge conveyor slewing angle left 60 degrees-right 6- degrees
- Discharge conveyor with adjustable conveyor speed and 2 slewing speeds for precise loading
- Machine with hydraulic standard coupling for the discharge conveyor (replaceable with optional equipment)
- Discharge conveyor, 8,150 mm long, 600 mm wide, without folding device (replaceable with optional equipment)
- Machine Control and Levelling System
- Digital milling depth indicator in the machine control display
- Precise machine height adjustment in 1 or 5 mm steps on the main control panel of the machine
- Digital load control, manual engageable, hydraulic differential lock (by flow distributor)
- Operator's Stand
- Hydraulically extending operator's stand for optimum visibility of the working area
- Steering console with adjustable rake and reach for ideal adaptation of the operator's stand to the operator
- Slender machine design permits unobstructed view of the milled edge as well as the working area in front of the milling drum on the right
- Conveniently accessible ladder/footstep to the operator's stand with night-time lighting and especially low bottom edge of the latter/footstep
- Robust anti-vandalism protection for the controls
- Mirror package comprising rear-view mirrors at front left and right as well as a forward-pointing mirror at the left of the operator's stand
- Reversing horn with clear audible signal
- Illuminated operating panel/nighttime design
- Standard operator's seat (replaceable with optional equipment)
- Under-Carriage and Height Adjustment
- Hydrualic height adjustment of the front and rear crawler units at two speeds
- 4 driven wheeled chassis (replaceable with optional equipment)
- Others
- Large tool package
- Device for towing away
- Generously sized water and diesel tanks
- Extensive safety package with several EMERGENCY STOP switches
- Machine preparation for installing the control unit for WITOS FleetView
- European type test certificate, Euro Test-mark and CE conformity
- Paint standard cream white RAL 9001 (replaceable with optional equipment)
- Halogen/LED lighting package including rotating beacon (replaceable with optional equipment)
- Base Machine
- Exhaust post-treatment diesel oxidation catalyst DOC with diesel particulate filter DPF
- Milling Drum Unit
- Milling drum housing FB1300 FCS
- Overload sensor on the scraper FB1300
- Active floating position for the right and left side plates
- Milling Drums
- Milling drum FB1300 HT22 LA15 FCS with 121 picks
- Milling drum FB1300 HT22 LA18 FCS with 107 picks
- FCS tandem scraper FB1300
- FCS milling unit FB300 HT22
- FCS milling unit FB500 HT22
- FCS milling unit FB600 HT22
- FCS milling unit FB900 HT22
- Assembly kit for moving the FCS milling drum
- Milling drum FB1300 HT22 LA8 FCS with 185 picks
- Milling drum FB1300 HT5 LA6X2 FCS with 444 picks
- Milling drum FB1300 HT22 LA25 FCS with 87 picks
- Milled-Out Material Loading
- Machine with hydraulic quick-change coupling for the discharge conveyor
- Discharge conveyor, 8,150 mm long, 600 mm wide, with hydraulic folding device
- Shortened discharge conveyor, 7,250 mm long, 600 mm wide, with hydraulic folding device
- VCS extraction system
- Machine Control and Levelling System
- SONIC SKI sensor for LEVEL PRO PLUS levelling system
- RAPID SLOPE sensor for LEVEL PRO PLUS levelling system
- Job data acquisition in the control display
- Operator's Stand
- Comfort operator's seat including seat heating
- Operator's stand with hydraulically lowering weather canopy
- Under-Carriage and Height Adjustment
- 4 driven crawler units-standard
- 4 driven crawler units-for increased travelling speed
- Others
- Paint in one special colour (RAL)
- Paint in two special colours (RAL)
- Paint in maximum two special colours with substructure in special colour (RAL)
- Powerful LED/halogen lighting package with rotary beacons
- Additional weight 515 kg
- Precision steering by pushbuttons
- Milling drum assembly trolley to FB1300
- Electric preheating of the fuel filter
- Signal lights truck stop-and-go, folding
- Electrohydraulic unit
- Hydraulically driven water filler pump
- High-pressure water cleaner, 190 bar, 15 l/min
- Air compressor system
- Pneumatic hammer with pick ejector/inserter
- Hydraulically driven pick ejector drift
- Milling drum rotation device
- Monitor system with 2 cameras and screen
- Monitor system with 3 cameras and screen
- Expanded lighting equipment
- WITOS FleetView telematics system incl. 3-year operating period (EU)
- WITOS FleetView telematics system incl. 3-year operating period (USA)
- WITOS FleetView telematics system incl. 3-year operating period-PROMOTION
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
