|
The highly flexible compact milling machines combine the advantages of the small and large milling machine classes. The maneuverable front-loaders are easy to transport and are ideal for use on confined job sites. These powerful machines can mill off entire asphalt pavements cost-effectively. A wide range of different milling drums is available, greatly extending the possible range of applications so that the milling of individual layers and fine milling operations are also among the everyday tasks of these machines.
- The front loader in the one-meter class stands out due to its outstanding performance and flexibility with working width of 3 ft 11 in (1.2 m).
- Compact dimensions and an optimized machine weight make the cold milling machine perfect for a wide range of job site operations.
- The milling unit is located at the rear of the machine on the right hand side, allowing the machine to drive directly up to obstacles at the rear, for example when milling tie-ins.
- The particularly large slewing angle and the speed of the front-loading conveyor belt can be flexibly adjusted for optimum material loading.
- The state-of-the-art machine control system with the LEVEL PRO PLUS leveling system and the intuitive user interface make efficient one-person operation possible.
|
|
| Length |
43 ft 10 in |
| Width |
8 ft 9 in |
| Height |
9’10” |
| Weight |
48,281 lbs |
| Engine Make |
Cummins |
| Engine Model |
QSL 9 |
| Engine Type |
US EPA Tier 4f |
| Cylinders |
6 |
| Horsepower |
345 HP |
| Cooling |
Wasser |
| Displacement |
2.4 gal |
| Fuel Consumption |
17.7 Gal/H (at rated power)
7.1 Gal/H (during a mixture of job site operations) |
| Fuel Tank Capacity |
161.1 gal |
| Water Tank Capacity |
422.7 gal |
| Tracks |
4’4” x 10.2” x 1’10” (track chains front/back) |
| Working Speed |
0-141 ft/min (1.6 mph) (Milling) |
| Travel Speed - Forward |
0 to 318 ft/min |
| Speeds |
0 to 318 ft/min (3.6 mph) (on tracks) |
| Hydraulic Tank Capacity |
34.3 gal |
| Cutting Width |
3 ft 11 in |
| Cutting Depth |
13” |
| Cutting Diameter |
3’3” |
| Conveyor Belt Width |
2’2” (Primary)
2’ (Discharge) |
- Standard Features
- Exhaust emissions category: US EPA Tier 4f
- Operating weight, CE: 48,281 lbs
- Milling width: 3 ft 11 in
- Milling depth max.: 13 in
- Displacement: 2.4 Imp.gal
- Max. travel speed in tracked design: 3.6 mph
- Max. milling speed: 1.6 mph
- Maximum power: 257 kW / 345 hp
Standard Equipment
- Base Machine
- Base machine with engine
- Mechanically opening engine cover with noise insulation
- Radiator with temperature-dependent fan speed
- Highly effective noise insulation throughout the engine compartment
- Automatic engine speed control depending on driving situation
- Elastically mounted engine station with low vibration and low noise
- Milling Drum Unit
- The right-hand side of the milling drum housing can be easily opened for maintenance or drum replacement
- Hydraulically operated scraper with mechanical locking
- Loading of Milled Material
- Discharge conveyor slewing angle: 60 degrees left -60 degrees right
- Hydraulically foldable discharge conveyor with two slewing speeds, including adjustable conveyor speed for precise loading
- Machine Control and Leveling
- Digital milling depth indicator on machine control panel
- LEVEL PRO PLUS leveling system right and left
- RAPID SLOPE cross-slope sensor for LEVEL PRO PLUS leveling system
- Precise machine height adjustment in increments of 1 or 5 mm via the machine’s main control panel
- Digital load control, can be engaged manually, hydraulic differential lock (via flow divider)
- Operator’s Platform
- Hydraulically extendable operator’s platform for optimum view of the working area
- Steering console with adjustable height and tilt to ideally adapt the platform to the operator’s needs
- Streamlined machine design allows a clear view of the milled edge and the working area in front of the milling drum on the right
- Easy access to the operator’s platform with night lighting and particularly low lower ladder rung
- Heavy-duty vandalism protection for the controls
- Mirror package consisting of front left and right rear-view mirrors and a forward-facing mirror to the left of the operator’s platform
- Reversing horn with clearly audible signal
- Illuminated control panel/night design
- Scraper height indicator on control panel
- Track Unit and Height Adjustment
- Dual-speed hydraulic height adjustment of front and rear track units
- 4 motorized crawler units
- Miscellaneous
- Large tool package
- Towing device
- Large water and diesel tank
- Comprehensive safety package with several EMERGENCY STOP switches
- Machine pre-equipped for installation of WITOS FleetView control unit
- European type certification, EuroTest mark and CE conformity
Standard Equipment, can be replaced with optional equipment if desired
- Base Machine
- Diesel oxidation catalyst (DOC) for exhaust aftertreatment
- Milling Drum Unit
- FB1200 milling drum housing
- Milling Drums
- FB1200 milling drum, HT22 LA15 with 115 picks
- Loading of Milled Material
- Machine with hydraulic standard coupling for the discharge conveyor
- Discharge conveyor, 26 ft 9 in (8,150 mm) long, 2 ft (600 mm) wide, with hydraulic folding device
- Operator’s Platform
- Miscellaneous
- RAL 9001 Cream paint standard
- WITOS FleetView (MF1, 3G) – professional telematics solution for machine operation and service optimization
- Halogen/LED lighting package including rotating beacon
- Base Machine
- Diesel oxidation catalyst (DOC) with diesel particulate filter (DPF) for exhaust aftertreatment
- Milling Drum Unit
- FB1200 FCS milling drum housing
- Milling Drums
- FB300 FCS-milling unit, HT22 LA12 with 61 picks
- FB500 FCS-milling unit, HT22 LA15
- FB600 FCS-milling unit, HT22 LA12 with 80 picks
- Kit for moving the FCS milling drum
- FB1200 FCS milling drum, HT22 LA15 with 112 picks
- FB1200 FCS milling drum, HT22 LA18 with 100 picks
- FB1200 FCS tandem scraper
- FB900 FCS-milling unit, HT22 LA15 with 102 picks
- FB1200 FCS milling drum, HT22 LA8 with 174 picks
- FB1200 FCS milling drum, HT5 LA6X2 with 410 picks
- FB1200 FCS milling drum, HT22 LA25 with 87 picks
- Loading of Milled Material
- Machine with hydraulic quick-release coupling for the discharge conveyor
- Shortened discharge conveyor, 23 ft 9 in (7,250 mm) long with 2 ft (600 mm) wide belt, with hydraulic folding device
- VCS extraction system
- Additional storage compartment on discharge conveyor
- Machine Control and Leveling
- Precision steering via push buttons
- Active floating position on side plates, right and left
- SONIC SKI sensor for LEVEL PRO PLUS leveling system
- Pre-equipped for 3D leveling level control
- Basic laser leveling equipment without laser transmitter
- Job data logging on control panel
- Overload sensor on FB1200 scraper
- Multiplex 3-way, right, with 2 ultrasonic sensors (FB1000/FB1200)
- Multiplex 3-way, right and left, with 4 ultrasonic sensors (FB1000/FB1200)
- Operator’s Platform
- Comfort driver’s seat including seat heater
- Operator’s platform with hydraulically lowerable weather canopy
- Miscellaneous
- Machine painted in a special color (RAL)
- RAL 9001 Cream standard protection film
- Custom protection film color upon request
- WITOS FleetView (MF2, 4G) – professional telematics solution for machine operation and service optimization
- WITOS FleetView (MF3, 4G) – professional telematics solution for machine operation and service optimization
- High-power LED lighting package including rotating beacon
- Milling drum mounting trolley for up to FB1300
- Electrical fuel filter preheating
- Signal lights for visual “stop-and-go” instructions for the truck driver
- Electrohydraulic unit
- Hydraulic water filling
- High-performance high-pressure water blaster (150 bar and 15 l/min)
- Air compressor system
- Pneumatic hammer with pick ejector/inserter
- Hydraulically powered pick ejector
- Milling drum rotation device
- Monitor system with 2 cameras and 1 screen
- Monitor system with 3 cameras and 1 screen
- Extended lighting equipment
- License plate holder with LED lighting
- Additional weight 515 kg
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
New Equipment Sales only available in assigned territories where Kirby-Smith Machinery, Inc. is a licensed distributor. Not all manufacturer's brands available at each location. Please contact your local Kirby-Smith branch if you have questions regarding availability.
