New Wirtgen SP 64i Inset Slipform Paver
With inset slipform pavers, the concrete is placed directly in front of the machine and distributed by a spreading auger or spreading plough. Vibrators compact the concrete homogeneously and the mold forms it in the specified width and thickness as the slipform paver advances. Integrated dowel bar and tie bar inserters position dowel bars and tie bars as specified. The finishing beam levels the area transverse to the pavement and the super smoother creates a perfect surface. When paving dual-layer concrete, the bottom-layer and top-layer concrete are processed simultaneously and paved wet-in-wet.
- The flexible 4-track slipform paver with concrete equipment specially adapted to the US market is suitable for a wide range of paving jobs with the highest quality surface evenness from 6 ft to 24 ft wide and 18 in thick (cannot be combined with all options).
- The particularly low ground pressure due to specially designed, longer crawler units simplifies operation under difficult operating conditions.
- The fully modular machine design, simple changeover and expansion, and hydraulic swing arms make the machine highly adaptable to any job site situation.
- The intelligent, electronic steering and control system ensures precise handling of the four crawler units and thus precise concrete paving.
- Precise insertion of tie bars and dowels via a self-loading dowel bar inserter (optional) makes it possible to pave concrete that requires reinforcing steel.
|
|
Length |
27’9” |
Width |
18" |
Height |
13'5" |
Weight |
37,500-99,200 lbs. |
Height Adjustment |
3’3” (hydraulic) 17” (mechanical) |
Crawler Track |
4 BO: 61" x 12" x 23X B1: 6'8" x 12" x 24" |
Engine Type |
EU Stage IV/US EPA Tier 4f |
Fuel Tank Capacity |
106 gal |
Engine Make |
Deutz |
Engine Model |
TCD 6.1 L6 |
Cylinders |
6 |
Horsepower |
241 HP |
Cooling |
Water |
Displacement |
369.5 in³ |
Fuel Consumption |
Full load: 12.2 gal/h 2/3 load: 4.8 gal/h |
Water System Tank |
132.5 gal + 132.5 gal |
Emission Standards |
EU Stage 4 / US Tier 4f |
Hydraulic Capacity |
Hydraulic oil tank: -Electric vibration: 53 gal -Hydraulic vibration: 106 gal |
Hydraulic Vibration |
6 connectors (optional 12 or 18) |
Hydraulically Driven Vibrators |
curved (D66) |
Paving Speed |
BO: 0-20 ft/min B1: 0-23 ft/min |
Travel Speed - Forward |
Travel Gear BO: 0-69 ft/min B1: 0-77 ft/min |
Center Crown |
For paving widths of 6’6” to 24’: max: 3% |
Area of Application |
Inset |
Position Units |
B0: 4'11" x 12" x 22" B1: 6'8" x 12" x 23" |
Electric Vibration |
18 connectors 110 V AC 3~/200 Hz |
Electrically Driven Vibrators |
curved (D76) |
Power Supply |
24 V DC |
Paving Width |
6’6”-24’ |
Paving Depth |
0-18” |
Spreader/Auger |
Modular extension to up to 24’ |
Slab Paving Application |
Paving width: 6’6”-24’ (wo/central crown); 12’-24’ (w/central crown) Layer thickness: up to 18” |
Slab Paving Equipment |
Modular extension to up to 24’ |
- Exhaust emissions category: EU Stage 5/US EPA Tier 4f
- Number of crawler tracks: 4
- Paving width: 6’6”-24’
- Paving height: 0-18”
- Paving width with crown: 12’-24’
- Paving width without crown: 6’6”-24’
- Paving speed: B0: 0-20 ft/min B1: 0-23 ft/min
- Travel speed: B0: 0 – 69 ft / min B1 0-77 ft/min
- Displacement: 369.5 Imp.gal
- Machine weight: 37,500-99,200 lbs.
- Height adjustment, mechanical: 17 in
- Rated power: 180 kW / 241 hp
-
Standard Equipment
- Basic Machine
- Basic machine consisting of engine station and machine frame telescoping mechanically to the left and right for accommodating slab paving molds between the track units, including pre-fitting for four track units
- Fuel tank 106 gal (400 l)
- Electrical system (24 V)
- Cooling system with temperature-controlled fan speed
- Hydraulic system including an adequately sized hydraulic oil tank and a pump transfer gearbox with two output shafts and the pumps required for the machine’s basic equipment package
- Main Frame and Height Adjustment
- Heavy-duty steel frame which can be telescoped to either side by 2 ft 6 in (750 mm), enabling a total telescoping range of 5 ft 4 in (1.63 m). Optional expansion using fixed extension pieces.
- The machine frame is pre-fitted with multiple mounting points for the modular addition for a variety of equipment features
- Concrete equipment between 6 ft 6 in and 13 ft 1 in can be connected to the frame, optionally extendable to 24 ft (depends on equipment, up to 20 ft with DBI)
- Crawler Units and Chassis Linkage
- Paving speed of B0 track unit: 0-20 ft/min (0-6 m/min)
- Transport speed of B0 track unit: 0-69 ft/min (0-21 m/min)
- Machine Control, Leveling, and Steering
- WI-CONTROL – high-quality control system ensuring perfect interaction between all machine features
- Error messages are displayed on the machine’s control screen
- The existing CAN bus system can be expanded to customer specifications
- ECO mode: performance-optimized engine management system for reduced diesel consumption and low noise emissions
- Proportional electrohydraulic leveling and steering by means of a PLC system including four leveling sensors and two steering sensors
- Sensor mounting brackets, adjustable in height and range
- Four leveling hydraulic cylinders with a stroke of 3 ft 6 in (1.10 m)
- Operator’s Platform
- Ergonomically designed operator’s platform providing a perfect view of the paving process
- Three control panels with clear, language-independent labeling for ergonomic operation
- Control panel 1 for machine setup according to site requirements
- Control panel 2 with multifunctional control screen providing the operator with all relevant machine parameters and allowing settings to be made via a menu; the control panel can be adjusted to all directions of travel and paving configurations
- Control panel 3 for controlling the concrete equipment
- Two control panels can be stored in the engine compartment; the third control panel can be protected against vandalism and weather by means of a lockable cover
- Automatic recognition of each machine configuration provides easy orientation for the machine operator
- Miscellaneous
- Paving Plus package: pivot angle display, speed indicator, and fully digital Ackermann steering
- Comprehensive toolkit in lockable toolbox
- Comprehensive safety package with EMERGENCY STOP switches
- Pre-fitting for installing the WITOS FleetView control unit
- Filling of the machine’s hydraulic system with mineral hydraulic oil
Standard Equipment, can be replaced with optional equipment if desired
- Main Frame and Height Adjustment
- Frame elements for mechanical telescoping in increments to working widths of up to 13 ft 1 in
- Crawler Units and Chassis Linkage
- Model with four B0 track units (four rollers), fitted with triple-grouser steel track pads
- Model with two manually pivoting track unit connections each, front and rear
- Machine Control, Leveling, and Steering
- Cylinder drives for model with four B0 track unit
- Vibration
- Hydraulic vibrator drive for max. 12 vibrators
- Ten curved vibrators D66, hydraulically driven
- Concrete Equipment for Slab Paving
- Paving mold series 1300 wi, without crown – basic width 12 ft
- One-piece side header for mold series 1300 wi/1310 wi
- Flat inserts for the outer edges of the mold series 1300 wi
- Miscellaneous
- Standard painting in RAL 9001 (cream)
- WITOS FleetView – professional telematics solution for machine operation and service optimization
- Lighting system including four halogen working lights, 24 V
- Main Frame and Height Adjustment
- Frame elements for continuous hydraulic telescoping to working widths of up to 20 ft
- Frame elements for continuous hydraulic telescoping to working widths of up to 24 ft, including extension elements
- Crawler Units and Chassis Linkage
- Model with four B0 track units (four rollers), fitted with polyurethan track pads
- Model with four B1 track units (six rollers), with triple grouser steel track pads
- Model with four B1 track units (six rollers), fitted with polyurethan track pads
- Model with two hydraulically pivoting track unit connections each, front and rear
- Additional control console for track unit adjustment
- Machine Control, Leveling, and Steering
- Cylinder drives for model with four B1 track units
- Cross-slope sensor
- Two slab tracers
- Four slab tracers
- Control console for manual track unit steering
- Pre-fitting for 3-D leveling
- Additional slope sensors for 3-D leveling
- Concrete Spreading Equipment for Slab Paving
- Spreading auger without crown – basic width 12 ft
- Split spreader auger with/without crown – basic width 12 ft
- Spreading plow – basic width 12 ft
- Spreading auger – extension element 1.00 ft, right-hand pitch
- Spreading auger – extension element 1.50 ft, right-hand pitch
- Spreading auger – extension element 2.00 ft, right-hand pitch
- Spreading auger – extension element 4.00 ft, right-hand pitch
- Spreading auger – extension element 1.00 ft, left-hand pitch
- Spreading auger – extension element 1.50 ft, left-hand pitch
- Spreading auger – extension element 2.00 ft, left-hand pitch
- Spreading auger – extension element 4.00 ft, left-hand pitch
- Spreading plow – extension element 1.00 ft
- Spreading plow – extension element 1.50 ft
- Spreading plow – extension element 2.00 ft
- Spreading plow – extension element 4.00 ft
- Vibration
- Straight vibrator D66, electrically driven
- Curved vibrator D66, hydraulically driven
- Curved vibrator D76, electrically driven
- Concrete Equipment for Slab Paving
- Metering gate for molds without crown – basic width 12 ft
- Split metering gate for molds with/without crown – basic width 12 ft
- Automatic metering gate control for concrete paving mold
- Metering gate – extension element 1.00 ft
- Metering gate – extension element 1.50 ft
- Metering gate – extension element 2.00 ft
- Metering gate – extension element 4.00 ft
- Paving mold series 1300 wi, with crown – basic width 12 ft
- Two-piece side header for start of shift with mold series 1300 wi/1310 wi
- Version without side header
- ESC “Edge Slump Control” inserts for the outer edges of the mold series 1300 wi
- Paving mold series 1300 wi – extension element 1.00 ft
- Paving mold series 1300 wi – extension element 1.50 ft
- Paving mold series 1300 wi – extension element 2.00 ft
- Paving mold series 1300 wi – extension element 4.00 ft
- Profile insert for series 1300 wi/1310 wi
- Automatic dowl bar inserter (DBI) for use without crown – basic width 12 ft
- Automatic dowl bar inserter (DBI) for use with crown – basic width 12 ft
- Base group for dowel bar inserter (DBI) for paving width up to 12 ft
- Base group for dowel bar inserter (DBI) for paving width up to 14 ft
- Base group for dowel bar inserter (DBI) for paving width up to 18 ft
- Base group for dowel bar inserter (DBI) for paving width up to 20 ft
- Electrical control for dowel bar inserter (DBI) and/or longitudinal tie bar inserter (TBI) + chassis extension for dowel bar inserter (DBI) and/or longitudinal tie bar inserter (TBI)
- Dowel bar inserter (DBI) – extension element 1.00 ft
- Dowel bar inserter (DBI) – extension element 1.50 ft
- Dowel bar inserter (DBI) – extension element 2.00 ft
- Dowel bar inserter (DBI) – extension element 4.00 ft
- Load brackets as modification aid for altering the width of the dowel bar inserter (DBI)
- DBI self-loading device including diesel-powered hydraulic unit
- Oscillating beam without crown – basic width 12 ft
- Oscillating beam with/without crown – basic width 12 ft
- Oscillating beam – extension element 1.00 ft
- Oscillating beam – extension element 1.50 ft
- Oscillating beam – extension element 2.00 ft
- Oscillating beam – extension element 4.00 ft
- Super smoother – basic width 12 ft
- Super smoother – extension element 1.00 ft
- Super smoother – extension element 1.50 ft
- Super smoother – extension element 2.00 ft
- Super smoother – extension element 4.00 ft
- Grout box auger without crown – basic width 12 ft
- Split grout box auger with/without crown – basic width 12 ft
- Grout box auger – extension element 1.00 ft
- Grout box auger – extension element 1.50 ft
- Grout box auger – extension element 2.00 ft
- Grout box auger – extension element 4.00 ft
- Tamper bar without crown – basic width 12 ft
- Tamper bar with/without crown – basic width 12 ft
- Tamper bar – extension element 1.00 ft
- Tamper bar – extension element 1.50 ft
- Tamper bar – extension element 2.00 ft
- Tamper bar – extension element 4.00 ft
- One side tie bar drive-in device for straight tie bars, max Ø ¾ in (20 mm), length 2.50 ft (760 mm)
- Two side tie bar drive-in devices for straight tie bars, max Ø ¾ in, length 2.50 ft (760 mm)
- Transport frame for oscillating beam and super smoother as transport unit
- Concrete Equipment for Offset Paving
- Offset paving mold up to 2 ft (0.60 m) wide, max. height of 16 in (0.40 m)
- Offset paving mold from 2 ft-3 ft 11 in (0.60-1.20 m) wide (max. height of 16 in (0.40 m))
- Offset paving mold from 3 ft 11 in-5 ft 11 in (1.20 m-1.80 m) wide (max height of 16 in (0.40))
- Offset paving mold up to 2 ft 11 in (0.90 m) high, max. base width of 2 ft, including hopper
- Offset paving mold up to 4 ft 3 in high, max. base width of 2 ft (0.60 m), including hopper
- Split offset paving mold up to 2 ft (0.60 m) wide, max. height of 16 in (0.40 m)
- Split offset paving mold from 2 ft to 3 ft 11 in (0.60 m-1.20 m) wide, max. height of 16 in (0.40 m)
- Bottom part for split offset paving mold (AV) up to 2 ft (0.60 m) wide (max. height of 16 in (0.40 m))
- Bottom part for split offset paving mold (AV) from 2 ft to 3 ft 11 in (0.60-1.20 m) (max. height of 16 in (0.40 m))
- Rigid mount for offset paving mold
- Set of hydraulic components for adjusting the side plate of an EV offset paving mold
- Set of hydraulic components for adjusting the side header of an AV offset mold
- Concrete Feeding System
- Belt conveyor 19 ft 8 in x 2 ft (6.00 m x 0.60 m), in folding design, with reversible hydraulic drive, hydraulically adjustable
- Charging auger 15 ft 1 in x 16 in (4.60 m x 0.40 m) with reversible hydraulic drive, hydraulically adjustable
- Auger conveyor 18 ft 8 in x 16 in (5.70 m x 0.40 m) with reversible hydraulic drive, hydraulically adjustable
- Steel chute
- Steel-rubber chute
- Offset Trimmer
- Trimmer, basic width 2 ft (0.60 m), for mounting on the left side
- Trimmer – extension 8 in (0.20 m) wide, for mounting on the left side
- Trimmer – extension 16 in (0.40 m) wide, for mounting on the left side
- Trimmer, basic width 2 ft (0.60 m), for mounting on the right side
- Trimmer – extension 8 in (0.20 m) wide, for mounting on the right side
- Trimmer – extension 16 in (0.40 m) wide, for mounting on the right side
- Operator’s Platform
- Weather canopy for operator’s platform with manual fold-down feature
- Extension of walkway allowing the operator to pass from one side of the machine to the other for working widths of up to 19 ft 7 in (6.00 m)
- Extension of walkway allowing the operator to pass from one side of the machine to the other for working widths of up to 24 ft 6 in (7.50 m)
- Miscellaneous
- Painting in one special color (RAL)
- Painting in two special colors (RAL)
- Painting in maximum two special colors with the lower part of the machine painted in special color (RAL)
- Model without WITOS FleetView
- High-performance lighting system including eight LED working lights, 24 V
- Hydraulic high-pressure water cleaning system with 145 gal (550 l) lastic tank
- Additional plastic water tank, 145 gal (550 l)
- Additional electrical water pump, 24 V, with 32 ft 10 in (10.00 m) hose and spray gun with handle
- Self-leveling feature for transport mode
- Rotating beacon, halogen 24 V, with magnetic base
- Two flashing beacons, 24 V, with magnetic base
- Automatic crown adjustment
- Two LED floodlights including power generator (230 V)
- Two LED floodlights including power generator (110 V)
- High-performance lighting system including four LED working lights, 24 V, for illuminating the compaction compartment
- Crane system for dowl bar packs, driven by means of a chain hoist
- Hydraulically driven crane system
- Stringline tensioning system, complete with 3,280 ft (1,000 m) steel wire rope
- Additional tensioning winch for stringline tensioning system
- Stringline tensioning system, complete with 4 x 984 ft (4 x 30 m) nylon rope
- Radius kit, fiberglass rod as stringline replacement for paving in corners with different radii
- Machine commissioning (day rate)
- Export packaging
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.