New Morbark Eeger Beever 1215 Brush Chipper for Sale
With its power and easily transportable design, the compact and economical Eeger Beever 1215 Brush Chipper is everything you need and nothing that you don't. The ideal machine for utility line clearing, residential tree care, rental yards, and municipalities. Remove the anxiety of engaging the chipper drum, damaged drive belts, and burned clutch discs, and elevate your operating experience with the exclusive Morbark ZeroClutch™ available now on select engine packages. Simply start, throttle the machine to full RPM's and engage the feed control bar. The Morbark ZeroClutch features an integrated drum speed sensor that monitors the drum speed and will not allow the clutch to engage if material is lodged between the feed wheel and drum, or the discharge chute is plugged. Ask your Morbark dealer or representative about the Morbark ZeroClutch today.
- INFEED: The 60″ wide x 31″ (152.4 cm x 78.74 cm) high chute opening and 15″ wide x 12″ (38.1 cm x 30.48 cm) high throat opening allows for easy feeding of branchy material and reduced saw labor.
- FEED WHEEL: TorqMax Top Feed Wheel Compression system with spring-assisted down pressure generates more than 3,200 lb/ft (4,338 Nm) of material pulling force.
- NEW-STYLE DISCHARGE: 360° swivel discharge with chip deflectors puts chips right where they’re needed without removing the chipper from the tow vehicle.
- Full-length channel frame extends beneath the infeed for increased structural support.
- Extendable drawbar with two (2) pinned extensions allows greater flexibility when mating to tow vehicle
- Powerful TorqMax™ single (top) feed wheel compression system amplifies material pulling power
- Dual-sided air impeller system increases air velocity to aid in discharging fibrous, light, and leafy material
- Large infeed perimeter opening allows ample room to feed material, reducing saw and trim labor
- Choice of gasoline or diesel engine packages
- Staggered pocket drum with two (2) dual-edged chipper knives
- Dual-sided air impeller system to increase chip throwing velocity
- Reversing automatic feed system
- Four (4) position feed control bar with dual safety pull cables located within the infeed
- 360° manual swivel discharge with multiple locking positions
- Pinned chipper hood with integrated hood safety plug
- Integrated tube and jack support pad to utilize from the drawbar jack to raise the feed wheel
Models
