Want to rent it?
Do you want to know if renting makes more economical sense?
Call us and find out today.
The toughest waste conditions require the best equipment. Designed with field experience and customer feedback, our dozer waste solutions offer ample pushing power and special filters and guards that provide protection from environmental debris.
Auto reversing fan: Minimize overheating from airborne debris with a fan that auto reverses based on adjustable interval and duration. Engine pre-cleaner: Keep your engine clear with a pre-cleaner that blocks and removes large particles from the air before they reach the engine air filter. Extra guards throughout: Help protect your machine from damage and contamination due to debris with extra guards added to final drive seals, tanks and engine. Track shoe holes: Reduces track compacting by allowing debris to be pushed through the track shoe holes. Re-located A/C condenser: Increase cooling efficiency with a re-located A/C condenser that’s mounted to the roof to protect it from debris. Trash rack: Your operator needs a wide range of vision while moving piles of waste. The trash rack was designed for optimal operator visibility with increased blade capacity. Front and rear striker bars: Reduce debris from riding up on the tracks and damaging the chassis with front and rear striker bars. Relocated hydraulic cooler: Keep your waste operation running at an optimal level and increase the cooling efficiency of your machine with an enhanced hydraulic cooler at the rear of the machine. |
Dimensions | |
---|---|
Length | 19’5” |
Width | 7’5” |
Height | 10’11” |
Weight | 55,100 lbs. |
Ground Clearance | 1’6” |
Turning Radius | 7’3” |
Operating Weight | 70,038 lbs. |
Fuel Tank Capacity | 124.1 US gallons |
Frame Type | Track roller: Monocoque, large section, durable construction |
Final Drive | Double-reduction final drive of spur and planetary gear sets to increase tractive effort and reduce gear tooth stresses for long final drive life. Segmented sprocket teeth are bolt-on for easy replacement. Triple labyrinth protects seals and improves durability. |
Engine | |
---|---|
Engine Make | Komatsu |
Engine Model | SAA6D125E-7 |
Engine Type | 4-cycle, Direct injection |
Cylinders | 6 |
Net Horsepower | 264 HP |
Cooling | Water-cooled |
Bore x Stroke | 4.49” x 5.69” |
Speed - Foreward | 1st: 2.1 MPH 2nd: 3.8 MPH 3rd L: 4.8 MPH 3rd: 6.3 MPH |
Speed - Reverse | 1st: 2.7 MPH 2nd: 5.0 MPH 3rd L: 5.7 MPH 3rd: 8.1 MPH |
Gross Horsepower | 267 HP |
Governor | All-speed and mid-range, electronic |
Rated RPM | 1900 rpm |
Lubrication System | Method: Gear pump, force lubrication Filter: Full-flow |
Aspiration | Komatsu variable geometry turbocharged, air-to-air aftercooled |
Piston Displacement | 674 in³ |
Fan Drive Type | Hydraulic |
Drivetrain | |
---|---|
Track Length | 11’5” |
Roller Type | Lubricated |
Ground Pressure | 6.02 PSI |
Track Number | 8 each side |
Grouser Height | 2.8” |
Hydraulic | |
---|---|
Control Valve | Spool control valves for semi-u tilt or straight tilt dozer Positions: Blade lift-Raise, hold, lower, and float Blade tilt-Right, hold and left Rear attachment-Raise, hold, and lower |
Hydraulic System | Closed-center load sensing system (CLSS) designed for precise and responsive control, and for efficient simultaneous operation. |
Hydraulic Cylinders | Number of Cylinders x Bore Blade lift: 2 x 4.0” Blade tilt: 1 x 5.9” Blade angle: 5.9” Ripper lift: 2 x 5.1” Pitch angle: 52°-58° |
Relief Valve Setting | 3,270 psi |
Operational | |
---|---|
Blade Width | 11’11” |
Blade Height | 7’2” |
Blade Capacity | 18.4 yd³ |
Suspension | Oscillating equalizer bar and pivot shaft |
Steering | Palm Command Control System (PCCS) lever controls for all directional movements. Pushing the PCCS lever forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the PCCS lever to left to make a left turn. Tilt it to the right for a right turn. Hydrostatic Steering System (HSS) is powered by steering planetary units and a hydraulic pump and motor. Counterrotation turns are also available. Wet, multiple-disc, pedalcontrolled service brakes are spring-actuated and hydraulically released. Gear shift lock lever also applies parking brake. |
Shoes | 45 each side Lubricated tracks. Unique dust seals for preventing entry of foreign abrasives into pin-to-bushing clearance for extended service life. Track tension is easily adjusted with grease gun. |
Shoe Width | 30” |
Shoe Type | Single grouser |
Track Gauge | 6’7” |
Ground Contact | 7,118 in² |
Standard Waste Handler Package Equipment
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
New Equipment Sales only available in assigned territories where Kirby-Smith Machinery, Inc. is a licensed distributor. Not all manufacturer's brands available at each location. Please contact your local Kirby-Smith branch if you have questions regarding availability.
Main Technical Specifications | |
---|---|
MAKE | Komatsu |
MODEL | D85PX-18 WH |
Do you want to know if renting makes more economical sense?
Call us and find out today.