Want to rent it?
Do you want to know if renting makes more economical sense?
Call us and find out today.
|
New Hitachi ZW220-7 Wheel Loader for Sale MORE PRODUCTIVITY. LOWER OWNERSHIP COST. Inspired by your demands for exceptional productivity at the lowest possible cost of ownership, the ZX220-7 offers industry-leading efficiency, comfort and safety. |
| Dimensions | |
|---|---|
| Length | 27’11”/28’2” (Weld-on teeth General Purpose Standard Arm) 27’6”/27’9” (Bolt-on cutting edge General Purpose Standard Arm) 28’8” (Weld-on teeth/segment edge Rock Bucket Standard Arm) 29’2”/29’4” (Bolt-on cutting edge General Purpose High-lift Arm) WO/Bucket 23’4” (Weld-on teeth & Bolt-on cutting edge General Purpose & Weld-on teeth/segment edge Rock Bucket Standard Arm) 24’12” (Bolt-on cutting edge General Purpose High-lift Arm) |
| Width | 9’3” |
| Height | 11’1” |
| Wheelbase | 10’10” |
| Ground Clearance | 1’6” |
| Turning Radius | 19’9” (centerline of outside tire) 11’7” (inside of tires) |
| Operating Weight | 40,109-41,035 lbs. |
| Steering Angle | Each direction 37°; total 74° |
| Final Drive | Heavy-duty planetary, mounted inboard |
| Tread | 7’1” |
| Loader Clearance Radius | 22’11”-22’12” (Weld-on teeth General Purpose Standard Arm) 22’9”-22’10” (Bolt-on cutting edge General Purpose Standard Arm) 23’2” (Weld-on teeth/segment edge Rock Bucket Standard Arm) 23’5”-23’6” (Bolt-on cutting edge General Purpose High-lift Arm) |
| Engine | |
|---|---|
| Engine Make | Cummins |
| Engine Model | B6.7 |
| Engine Type | Direct injection |
| Cylinders | 6 |
| Gross Horsepower | 210 HP |
| Net Horsepower | 204 HP |
| Cooling | Water-cooled |
| Bore x Stroke | 4.2” x 4.9” |
| Displacement | 410.1 cu.in |
| Air Cleaner | Two element dry type with restriction indicator |
| Fuel Tank Capacity | 67.3 Gallons |
| Battery | 2 x 12 V |
| Aspiration | Turbocharger and intercooled |
| Cycles | 4 |
| Emission Standards | EPA Final Tier 4/EU Stage V |
| Torque Converter | Three element, single stage, single phase |
| After-Treatment | DPF+SCR system |
| Final Reduction Gear | Two stage reduction with limited slip differential |
| Cooling Method | Forced circulation type |
| Drivetrain | |
|---|---|
| Axles | Semi-floating (front and rear) Front: fixed to the front frame Rear: Trunnion support |
| Transmission Type | Torque convertershaft type powershift with computer-controlled automatic shift and manual shift features included |
| Torque | 990 Nm at 1300 min |
| Drive System | Four-wheel drive system |
| Brakes | Service: inboard mounted fully hydraulic 4 wheel wet disc brake. Front and rear independent brake circuit. Parking: Spring applied, hydraulically released, dry disc type with external output shaft |
| Tires | 23.5R25 (L3) |
| Hydraulic | |
|---|---|
| Pump | Main: Variable displacement axial plunger pump Fan: Fixed displacement gear pump |
| Hydraulic Tank Capacity | 30.1 Gallons |
| Hydraulic Flow | Main Pump: 72.6 Gallons Fan Pump: 17.4 Gallons |
| Hydraulic Cylinders | Double acting type No. x Bore x Stroke: Arm-2 x 5.1” x 34.6” & Bucket-1 x 6.5” x 20.1” |
| Hydraulic Cycle Time | Lift arm raise: 5.6 seconds Lift arm lower: 3.3 seconds Bucket Dump: 1.5 seconds Total: 10.4 seconds |
| Hydraulic Pressure | Main Pump: 3,974 PSI Fan Pump: 2,756 PSI |
| Hydraulic Filter | Full-flow 9 micron return filter in reservoir |
| Operational | |
|---|---|
| Bucket Width | 9’7” |
| Dig Depth | 4” (Weld-on teeth & Bolt-on cutting edge General Purpose Standard Arm) 6” (Weld-on teeth/segment edge Rock Bucket Standard Arm) 7” (Bolt-on cutting edge General Purpose High-lift Arm) |
| Bucket Capacity | 3.6 yd³-7.8 yd³ |
| Height to Bucket Pin | 1’5” (carry height at carry position) 13’5” (Weld-on teeth & Bolt-on cutting edge General Purpose & Weld-on teeth/segment edge Rock Bucket Standard Arm) 14’9” (Bolt-on cutting edge General Purpose High-lift Arm) |
| Dump Reach | 4’ & 4’2” (Weld-on teeth General Purpose Standard Arm) 3’8” & 3’10” (Bolt-on cutting edge General Purpose Standard Arm) 4’5” (Weld-on teeth/segment edge Rock Bucket Standard Arm) 4’2” & 4’4” (Bolt-on cutting edge General Purpose High-lift Arm) |
| Bucket Breakout Force | 32,634/35,060 lbs. (Weld-on teeth General Purpose Standard Arm) 30,429/32,414 lbs. (Bolt-on cutting edge General Purpose Standard Arm) 29,547 lbs. (Weld-on teeth/segment edge Rock Bucket Standard Arm) 27,783/29,548 lbs. (Bolt-on cutting edge General Purpose High-lift Arm) |
| Steering | Articulated frame steering |
| Travel Speed - Forward | 1st: 3.9 MPH 2nd: 6.8 MPH 3rd: 9.9 MPH 4th: 14.7 MPH 5th: 22.5 MPH |
| Travel Speed - Reverse | 1st: 4.1 MPH 2nd: 7.1 MPH 3rd: 15.4 MPH 4th: 14.7 MPH 5th: 22.5 MPH |
| Breakout Force | 32,634 lbf |
| Oscillation Angle | Total 24° (+12°, -12°) |
| Rollback Angle | 47° at carry position w/standard arm 46° at carry position w/high-lift arm 43° at carry position w/standard arm 44° at carry position w/high-lift arm 60° at carry position w/standard arm 52° at carry position w/high-lift arm |
| Dump Clearance | 9’2” & 8’12” (Weld-on teeth General Purpose Standard Arm) 9’6” & 9’4” (Bolt-on cutting edge General Purpose Standard Arm) 8’8” (Weld-on teeth/segment edge Rock Bucket Standard Arm) 10’10” & 10’8” (Bolt-on cutting edge General Purpose High-lift Arm) |
| Static Tipping Load | 33,582 & 33,494 lbs. (straight) & 29,745 & 33,494 lbs. (full 37 degree turn) (Weld-on teeth 33,009 & 32,921 lb. (straight) & 33,009 & 29,062 lbs. (full 37 degree turn) (Bolt-on cutting edge General Purpose Standard Arm) 32,678 lbs. (straight) & 13,070 lbs. (full 37 degree turn) (Weld-on teeth/segment edge Rock Bucket Standard Arm) 25,975/26,151 lbs. (straight) & 22,800/22,976 lbs. (full 37 degree turn) (Bolt-on cutting edge General Purpose High-lift Arm) |
| Operating Height | 18’1”-18’3” (Weld-on teeth & Bolt-on cutting edge General Purpose Standard Arm) 17’9” (Weld-on teeth/segment edge Rock Bucket Standard Arm) 19’5” & 19’7” (Bolt-on cutting edge General Purpose High-lift Arm) |
| Main Clutch | Wet hydraulic, multi-disc type |
| Steering Cylinders | Double-acting piston type |
| Steering Bore x Stroke | Number: 2 2.8” x 17.4” |
| Arm Controls | Arm and bucket controlled by multifunction lever Four position valve; Raise, hold, lower, float |
| Bucket Controls | Bucket controls w/automatic bucket return-to-dig control Three position valve; Roll back, hold, dump |
| Lift Arm Clearance | 12’4” (Weld-on teeth & Bolt-on cutting edge General Purpose & Weld-on teeth/segment edge Rock Bucket Standard Arm) 13’9” (Bolt-on cutting edge General Purpose High-lift Arm) |
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
New Equipment Sales only available in assigned territories where Kirby-Smith Machinery, Inc. is a licensed distributor. Not all manufacturer's brands available at each location. Please contact your local Kirby-Smith branch if you have questions regarding availability.
| Main Technical Specifications | |
|---|---|
| MAKE | Hitachi |
| MODEL | ZW220-7 |
Do you want to know if renting makes more economical sense?
Call us and find out today.
