Hitachi ZW160PL-7

New Loader

New Hitachi ZW160PL-7 Loader for Sale

TAKE CONTROL.

Keep your loads level and under control through the entire lift process with the parallel linkage feature. An easy-to-use hydrostatic transmission and overall focus on enhanced comfort, versatility and safety will help you tackle even your toughest jobs.
Dimensions
Wheelbase 9‘10”
Ground Clearance 1’5”
Turning Radius 16’8” (centerline of outside tire)
9’5” (inside of tires)
Overall Length 25’6”-25’12”
Wo/bucket: 21’6”
Overall Height 10’9”
Operating Weight 28,467-29,983 lbs.
Steering Angle Each direction 40°; total 80°
Rear Axle Trunnion support
Final Drive Heavy-duty planetary, mounted inboard
Reach 4’2”-4’8”
Width over Tires 8’2”
Tire Size 20.5 R25 (L3)
Bucket Weight 2,094-2,249 lbs.
Tread 6’4”
Loader Clearance Radius 19’9”-19’10” (bucket in carry position)
Steering Type Articulated frame steering
Height of Bucket Pin 1’3” at carry position
Engine
Engine Make Cummins
Engine Model B4.5
Engine Type Air-cooled, Direct injection
Cylinders Double-acting piston type
Net Horsepower 169 HP
Bore x Stroke 4.2” x 4.9”
Air Cleaner Two element dry type with restriction indicator
Battery 2 x 12 V
Aspiration Turbocharger and intercooled
Cycles 4
Piston Displacement 273.4 cu. in.
After-Treatment DPF+SCR system
Travel Speed (Forward/Reverse)
1st: 8.1/8.1 mph
2nd: 8.1/8.1 mph
3rd: 12.4/12.4 mph
4th: 24.2/24.2 mph
Cooling Method Forced circulation type
Drivetrain
Axles Semi-floating
Transmission Electrical-controlled 2 motor hydrostatic transmission with summation gear box. Gear box: Fixed gear ratio, powershift countershaft type
Torque 755 Nm
Drive System Four-wheel drive system
Brakes Service: Inboard mounted fully hydraulic 4 wheel wet disc brakes. Front and rear independent brake circuit, HST (Hydr Static Transmission) system provides additional hydraulic braking capacity
Parking: Spring applied, hydraulically released, wet disc type
Hydraulic
Hydraulic System Arm & bucket are controlled by multifunction lever
Arm controls: Four position valve; Raise, hold, lower, float
Bucket Controls w/automatic bucket return-to-dig control
Three position valve; Roll back, hold, dump
Hydraulic Cylinders Double acting type
Number of Cylinders 4
Hydraulic Cycle Time Lift arm raise: 6.8 seconds
Lift arm lower: 3.6 seconds
Bucket Dump: 3.4 seconds
Total: 13.8 seconds
Hydraulic Filter Full-flow 10 micron return filter in reservoir
Hydraulic Bore x Stroke Arm: 2 x 4.9 x 30”
Bucket: 2 x 4.3 x 39.6”
Operational
Bucket Width 8’4”
Dig Depth 0’4”-0’5”
Bucket Capacity Heaped: 2.7-2.9 yd³
Struck: 2.4-2.5 yd³
Height to Bucket Pin 13’0” (hinge fully raised)
Front Axle Fixed to the front frame
Flow Main Pump: 51.2 gallons
Brake and fan and pilot oil Pump: 11.9 gallons
Breakout Force 22,509 lbf
Oscillation Angle Total 20° (+10°, -10°)
Pump Type Main & Brake/fan/pilot oil Pump: Gear type
Rollback Angle Carry Position: 47°
Ground Level: 44°-45°
Full Height: 53°
Dump Clearance 8’8”-9’1”
Static Tipping Load Straight: 21,098-21,539 lbs.
Full Turn: 18,188-18,607lbs.
Operating Height 17’4’”-17’5”
Steering Bore x Stroke 2 x 2.6” x 16.5” (No. Bore x Stroke)
Pressure Main Pump: 2989 PSI
Brake and fan and pilot oil Pump: 2248 PSI
Lift Arm Clearance 12’0”-12’1”
Reduction and Differential Gear Two stage reduction with limited slip differential

ENGINE

  • Aftertreatment device
  • Aftertreatment manual regeneration inhibit switch
  • Aftertreatment manual regeneration switch
  • Air filter double elements
  • Air intake
    • Pre-cleaner (sy-klone type)
  • Anti-clogging radiator (wide fin pitch)
  • Automatic reversible cooling fan with heat sensing
  • Cartridge-type engine oil filter
  • Cartridge-type fuel main filter
  • Cartridge-type fuel pre-filter (with water separator function)
  • Coolant reservoir sight gauge
  • DEF/AdBlue® tank with magnet adapter
  • Engine auto shut-down control system
  • Engine oil remote drain
  • Fan guard

 

BRAKE SYSTEM

  • Front and rear independent brake circuit
  • Inboard mounted fully hydraulic 4 wheel wet disc
  • Spring-applied/Hydraulic-released parking brake

 

HYDRAULIC SYSTEM

  • Bucket auto leveler (automatic return to dig control)
  • Control lever lock switch
  • Dual lift arm auto leveler and kickout system
  • Electric control lever
    • for 3 spools control valve
      • MF lever and Proportional switch for 3rd function
  • Hydraulic filters
  • Lift arm float system
  • Quick coupler piping and switch
  • Reservoir sight gauge
  • Ride control system (OFF-AUTO type)
  • Work mode selector

 

CAB

  • Adjustable steering column with POP-UP
  • Auto control air conditioner
    • with double intake filter
  • Bluetooth® integrated DAB+radio, hands-free calling
  • Camera and monitor
    • Rear view camera and monitor
  • Coat hook
  • Evacuation hammer
  • Front/rear defroster
  • Glove compartment
  • LED room light
  • Rear view mirrors
    • Inside (1)
    • Standard outside mirrors
  • Retractable seat belt, 3.0 in (76 mm)
  • ROPS (ISO 3471: 2008), FOPS (ISO 3449: 2008 LEVEL ll):
  • multi-plane isolation mounted for noise , vibration reduction
  • Rubber floor mat
  • Seat
  • Heavy duty air suspension seat equipped with horizontal suspension headrest and heater: fabric, high back, adjustable for damper, inclination of the seat, seat depth, weight-height, fore-aft position, reclining angle, armrest angle, headrest height and angle, lumbar support
  • Seat belt reminder
  • Steering system
    • Wheel steering
  • Storage
    • Cup holder
    • Document holder
    • Hot and cool box
    • Seatback pocket
    • Smartphone and Tablet device holder
  • Sunscreen roller type
  • Textured steering wheel with spinner knob
  • Tinted safety glass
    • Front windshield: laminated
    • Others: tempered
  • USB power supply
  • Windshield washer front and rear
  • Windshield wipers front and rear
  • 2 speakers
  • 8 inch sub monitor

 

MONITORING SYSTEM

  • Gauge: coolant temperature, fuel level, transmission oil temperature
  • Indicator lights: clearance lights, control lever lock, fuel level, high beam, parking brake, preheat, turn signals, work lights, fan reverse indicator, seat belt indicator
  • Indicator on multifunction monitor: F-N-R shift position, gear shift position, clock, DEF alarm indicator, DEF level gauge, ECO indicator, forward/reverse selector switch indicator, hold display, hour meter, odometer, battery volt, speedometer, tachometer, transmission auto-shifting indicator, Warning lights: air filter restriction, brake oil low pressure, communication system error, discharge warning, engine oil low pressure, engine warning, hydraulic oil level, low steering oil pressure, overheat, transmission warning
  • Indicator on sub monitor: payload checker (excluding PL), dual auto-leveler indicator rear obstacle detection and warning system (optional)
  • 38 languages selection

 

ELECTRICAL SYSTEM

  • Alternator (95 A)
  • Backup alarm
  • Battery disconnect switch
  • Large capacity batteries
  • Power outlet 12 V and 24 V

 

LIGHTS

  • Clearance lights
  • LED brake and tail lights
  • LED headlights
  • Turn signals with hazard switch
  • Work lights
    • premium work light package 4 front, 2 rear on cab and 2 rear LED working lights

 

TIRES

  • 20.5R25 (L3) VJT

 

MISCELLANEOUS

  • Articulation lock bar
  • Cab top rail
    • Front rail on the cab top
    • Rear rail on the cab top
  • Counterweight, built-in
  • Drawbar with locking pin
  • Fenders
    • for 20.5 R25 (front and half covered rear fenders)
  • Global e-Service
  • Lift and tie down hooks
  • Lift arm
    • Parallel lift arm
  • On board information controller
  • Anti-Vandalism
    • Battery cover with locking bracket
    • Lockable engine cover
    • Lockable fuel refilling cap
  • Standard tool kit

 

POWER TRAIN

  • Approach speed control
  • Deceleration select switch
  • Differential
    • LSD (limited slip differential, front and rear)
  • Electrically controlled HST system
  • Forward/reverse lever
  • Forward/reverse selector switch
  • Power mode switch
  • Traction control switch
  • 1st speed limited switch

ENGINE

  • Air intake
    • Pre-cleaner (Turbo II)

CAB

  • Auto control air conditioner
    • Pre-cleaner for air conditioner
  • Camera and monitor
    • AERIAL ANGLE (Side and rear view camera)
  • Rear obstacle detection system
  • Rear view mirrors
    • Premium Outside (heated, 2) electrical adjustment with proximity

LIGHTS

  • Rotating lamp

MISCELLANEOUS

  • Belly guard (bolt on type) (front/rear)
  • Bucket cylinder guard
  • Emergency steering
  • Fenders
    • for 20.5 R25 (front and full covered rear fenders with mud flaps)
  • Quick coupler
  • Radiator dust protection screen

POWER TRAIN

  • Driving speed limiter 12.4 mph (20 km/h)

*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.

New Equipment Sales only available in assigned territories where Kirby-Smith Machinery, Inc. is a licensed distributor. Not all manufacturer's brands available at each location. Please contact your local Kirby-Smith branch if you have questions regarding availability.

View Brochure

Main Technical Specifications
MAKE Hitachi
MODEL ZW160PL-7

Want to rent it?

Do you want to know if renting makes more economical sense?
Call us and find out today.

Hitachi ZW160PL-7

print
6715 W. Reno
Oklahoma City, OK 73127 Phone: 888.861.0219
www.kirby-smith.com
CUSTOMER
DATE
PRICE
SALESPERSON

New Hitachi ZW160PL-7 Loader for Sale

TAKE CONTROL.

Keep your loads level and under control through the entire lift process with the parallel linkage feature. An easy-to-use hydrostatic transmission and overall focus on enhanced comfort, versatility and safety will help you tackle even your toughest jobs.
GENERAL INFORMATION
Manufacturer
Hitachi
Model Year
Model
ZW160PL-7
Condition
NEW
Dimensions
Wheelbase
9‘10”
Ground Clearance
1’5”
Turning Radius
16’8” (centerline of outside tire) 9’5” (inside of tires)
Overall Length
25’6”-25’12” Wo/bucket: 21’6”
Overall Height
10’9”
Operating Weight
28,467-29,983 lbs.
Steering Angle
Each direction 40°; total 80°
Rear Axle
Trunnion support
Final Drive
Heavy-duty planetary, mounted inboard
Reach
4’2”-4’8”
Width over Tires
8’2”
Tire Size
20.5 R25 (L3)
Bucket Weight
2,094-2,249 lbs.
Tread
6’4”
Loader Clearance Radius
19’9”-19’10” (bucket in carry position)
Steering Type
Articulated frame steering
Height of Bucket Pin
1’3” at carry position
Engine
Engine Make
Cummins
Engine Model
B4.5
Engine Type
Air-cooled, Direct injection
Cylinders
Double-acting piston type
Net Horsepower
169 HP
Bore x Stroke
4.2” x 4.9”
Air Cleaner
Two element dry type with restriction indicator
Battery
2 x 12 V
Aspiration
Turbocharger and intercooled
Cycles
4
Piston Displacement
273.4 cu. in.
After-Treatment
DPF+SCR system
Travel Speed
(Forward/Reverse) 1st: 8.1/8.1 mph 2nd: 8.1/8.1 mph 3rd: 12.4/12.4 mph 4th: 24.2/24.2 mph
Cooling Method
Forced circulation type
Drivetrain
Axles
Semi-floating
Transmission
Electrical-controlled 2 motor hydrostatic transmission with summation gear box. Gear box: Fixed gear ratio, powershift countershaft type
Torque
755 Nm
Drive System
Four-wheel drive system
Brakes
Service: Inboard mounted fully hydraulic 4 wheel wet disc brakes. Front and rear independent brake circuit, HST (Hydr Static Transmission) system provides additional hydraulic braking capacity Parking: Spring applied, hydraulically released, wet disc type
Hydraulic
Hydraulic System
Arm & bucket are controlled by multifunction lever Arm controls: Four position valve; Raise, hold, lower, float Bucket Controls w/automatic bucket return-to-dig control Three position valve; Roll back, hold, dump
Hydraulic Cylinders
Double acting type
Number of Cylinders
4
Hydraulic Cycle Time
Lift arm raise: 6.8 seconds Lift arm lower: 3.6 seconds Bucket Dump: 3.4 seconds Total: 13.8 seconds
Hydraulic Filter
Full-flow 10 micron return filter in reservoir
Hydraulic Bore x Stroke
Arm: 2 x 4.9 x 30” Bucket: 2 x 4.3 x 39.6”
Operational
Bucket Width
8’4”
Dig Depth
0’4”-0’5”
Bucket Capacity
Heaped: 2.7-2.9 yd³ Struck: 2.4-2.5 yd³
Height to Bucket Pin
13’0” (hinge fully raised)
Front Axle
Fixed to the front frame
Flow
Main Pump: 51.2 gallons Brake and fan and pilot oil Pump: 11.9 gallons
Breakout Force
22,509 lbf
Oscillation Angle
Total 20° (+10°, -10°)
Pump Type
Main & Brake/fan/pilot oil Pump: Gear type
Rollback Angle
Carry Position: 47° Ground Level: 44°-45° Full Height: 53°
Dump Clearance
8’8”-9’1”
Static Tipping Load
Straight: 21,098-21,539 lbs. Full Turn: 18,188-18,607lbs.
Operating Height
17’4’”-17’5”
Steering Bore x Stroke
2 x 2.6” x 16.5” (No. Bore x Stroke)
Pressure
Main Pump: 2989 PSI Brake and fan and pilot oil Pump: 2248 PSI
Lift Arm Clearance
12’0”-12’1”
Reduction and Differential Gear
Two stage reduction with limited slip differential

Legal Notice: Manufacturer Name, Logo and Model Information are Registered Trademarks of the Manufacturer.
Specifications and other information are subject to change without notice. No representation of accuracy is made.
Image is believed to be in the public domain or used with permission.
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.

New Equipment Sales only available in assigned territories where Kirby-Smith Machinery, Inc. is a licensed distributor. Not all manufacturer's brands available at each location. Please contact your local Kirby-Smith branch if you have questions regarding availability.
LOCATIONS
CAREERS
CONTACT