Why rent when you can own?
Call us to see if ownership makes economical sense for you and your organization.
|
Hitachi ZW120-6 Loader Offering exceptional levels of performance without compromising on efficiency, Hitachi ZW-6 wheel loaders are designed to satisfy the requirements of the North American construction industry. Designed to be reliable, durable and versatile for a variety of job sites, and to operate with low levels of fuel consumption, they incorporate the highquality engineering for which Hitachi is renowned. RELIABILITY
VERSATILITY
QUALITY
TECHNOLOGY
|
| Dimensions | |
|---|---|
| Length | 21’ |
| Width | 7.4’ |
| Height | 10.5’ |
| Weight | 18,590 lbs. (Standard Arm) 19,850 lbs. (High Lift Arm) |
| Wheelbase | 8.9’ |
| Ground Clearance | 14.6” |
| Turning Radius | 16.2’ |
| Steering Angle | Each direction 40°, total 80° |
| Engine | |
|---|---|
| Engine Make | Deutz |
| Engine Model | TCD3.6L4F |
| Engine Type | Diesel engine, direct injection w/turbocharger and air cooled intercooler |
| Gross Horsepower | 99 HP |
| Net Horsepower | 95 HP |
| Cooling | Water-cooled Module type: Forced circulation type |
| Bore x Stroke | 3.9” x 4.7” |
| Displacement | 221 in³ |
| Speed - Foreward | 1st-7.1 mph 2nd-34.5 mph |
| Speed - Reverse | 1st-7.1 mph 2nd-34.5 mph |
| Gears | Reduction & differential: Two-stage reduction with torque proportional differential Final Reduction: Inboard mounted, heavy duty planetary gear |
| Air Cleaner | Dry type (double element) with restriction indicator |
| Fuel Type | #2 Diesel (Requires ultra-low sulfur fuel) |
| Fuel Tank Capacity | 37 Gallons |
| Starter | DC 24V-5.4 HP |
| Battery | 12V-800 CCA, 2 units |
| Alternator | DC 24V-100A |
| Governor | All speed electrical type |
| Rated RPM | 2000 RPM |
| Aspiration | Turbocharger and intercooled |
| Cycles | 4 |
| Drivetrain | |
|---|---|
| Axles | Semi-floating type |
| Transmission Type | Electrical-controlled 1 motor hydrostatic transmission with gear box; Gear box: Fixed gear ratio, powershift countershaft type |
| Torque | 400 Nm at 1,600 |
| Drive System | Four-wheel drive system |
| Brakes | Service: Inboard mounted fully hydraulic 4-wheel wet disc brakes. Front & rear independent brake circuit, HST (Hydro Static Transmission) system provides additional hydraulic braking capacity Parking/Emergency: Spring-applied, hydraulically-released transmission output shaft mounted multi wet disc |
| Tires | 17.5-25-12PR (L-2) |
| Hydraulic | |
|---|---|
| Pump | Electronically controlled, common rail type (Fuel Injection Pump) |
| Hydraulic Cylinders | Lift (Boom): Two (2) double-acting piston type: 4.1” x 28” Tilt (Bucket): Two (2) double-acting piston type: 4.9” x 17.5” Steering: Two (2) double-acting piston type: 2.4” x 15.6” |
| Number of Cylinders | 4 |
| Hydraulic Cycle Time | Front end loading, Z bar linkage system Lifting time (at full load): 6.6 seconds Lowering time (empty): 2.7 seconds Bucket dumping time: 1.6 seconds Total: 10.9 seconds |
| Relief Valve Setting | 2988 PSI (Loading) 2495 PSI (Steering) |
| Hydraulic Pump | Main oil: 2988 PSI HST Charging: 363 PSI |
| Operational | |
|---|---|
| Dig Depth | 3”-8” |
| Tipping Load | Standard Arm: 14,330 lbs. High Lift Arm: 12,940 lbs. |
| Bucket Capacity | 2-2.4 yd³ (heaped) 1.5-1.6 yd³ (struck) |
| Height to Bucket Pin | 11.7’ (Standard Arm fully raised) 12.8’ (High Lift Arm fully raised) |
| Dump Reach | 8.9’ (Standard Arm) 3.9’ (High Lift Arm) |
| Steering | Articulated frame steering Mechanism: Double-acting piston type |
| Travel Speed - Forward | 1st: 7.1 MPH 2nd: 21.4 MPH |
| Travel Speed - Reverse | 1st: 7.1 MPH 2nd: 21.4 MPH |
| Max. Reach | Standard Arm: 8.9’ (45° dump, full height) High Lift Arm: 3.9’ (45° dump, full height) |
| Breakout Force | 16,840 lbf (Standard Arm) 16,590 lbf (High Lift Arm) |
| Oscillation | Angle: Total 20 (+10,-10)° |
| Rollback Angle | 49 deg (Standard Arm)/50 deg (High Lift Arm) (Max at carry position) 56 deg (Standard Arm)/52 deg (High Lift Arm) (at full height) |
| Dump Clearance | 8’8”-10’ |
| Hinge Pin Height | 11’8”-12’10” |
| Clearance Circle | 17’10”-18’5” (outside of bucket) 16’2” (outside of tire) |
| Bucket Tilt | 40-44 deg (at ground position) |
| Static Tipping Load | 14,330 lbs. (Standard Arm) 12,940 lbs. (High Lift Arm) |
ENGINE
POWERTRAIN
HYDRAULIC SYSTEM
ELECTRICAL
CAB
OTHERS
ALARMS, GAUGES, INDICATORS
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
