One of Manitowoc's new small crawler crane line, this 100 ton (91 tonne) crawler is backed by Manitowoc's industry-leading Manitowoc Crane Care product support division, which covers parts, service and training. Contractors will appreciate the simple operation, ease of setup and reliability of this small crawler crane.
GENERAL INFORMATION
Manufacturer
Manitowoc
Model Year
2010
Model
10000
MSRP
Request a Quote
DIMENSIONS
Length
20 ft. 8 in. (6.30 m)
Width
Extended: 16 ft. 10 in. (5.14 m)
Retracted: 11 ft. 10 in. (3.61 m)
Height
20 ft. 4 in. (6.20 m)
Weight
179,700 lbs. (81,500 kg)
Track Width
36 in. (914 mm)
Capacity
100 T
ENGINE
Engine Make
Hino
Engine Model
P11C-UN
Engine Type
Water-cooled diesel, direct fuel injection with turbocharger
Gross Horsepower
332 hp (247 kW) @ 2,000 (high-idle)
Torque
959 ft. lbs. (1,300 Nm) @ 1,500 rpm
Cylinders
6
Max Travel Speed
1.18 mph (1.9 km/h)
Fuel Tank Capacity
105 gal. (400 l)
DRIVETRAIN
Drive
Crawler: Independent hydraulic propel drive
ELECTRICAL
Electrical System
(2) 12V 136Ah batteries, 24V system & 50A alternator
HYDRAULICS
Hydraulic System
Max. Pressure Rating: 4,640 psi (325 kg/cm²) Load Hoist, Boom Hoist and Propel: 2 piston pumps Swing: 1 piston pump Control System & Auxiliary: 2 gear pumps Brake Cooling System: 2 gear pumps Reservoir Capacity: 100 gal. (380 l) Cooling: Oil-to-air heat exchanger (plate fin-type) Filtration: Full-flow and bypass type with replaceable paper element
BODY
Cab
Totally enclosed, full vision cab fitted with tinted safety glass; fully adjustable, highbacked seat with arm rests; side mounted console for auxiliary controls and instruments; air conditioner, a signal horn, cigarette lighter, windshield wiper and inspection lamp socket
Frame
Carbody: Steel welded construction with extendible axles
OPERATIONAL
Steering
Hydraulic propel system provides both skid steering and counter-rotating steering and differential track speed
Brakes
Crawler: Spring-set, hydraulically released
Counterweight
Carbody: 16,100 lbs. (7,300 kg) Upperworks: 63,500 lbs. (28,800 kg) Total: 79,600 lbs. (36,100 kg)
BOOM
Boom Type
Welded lattice construction using tubular, high-tensile
steel chords with pin connections between sections
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
Specs, Quotes, Overview
